EUVIMEDEUVIMED entdecken
Crossref

EVALUATING THE MARGINAL DISCREPANCY AND SURFACE ROUGHNESS OF CAD - CAM MILLED VS 3D PRINTED PROVISIONAL CROWNS - AN INVITRO STUDY

Himabindu Ravella, Gnana Sruthi Mayakuntla, Satyendra Tedlapu, Sunitha Ronaki, Kommu Vasudha, Rajasekhar Adduri

International Journal of Advanced Research · 30.09.2024 · 12 (09) · 356-365

DOI: 10.21474/ijar01/19463 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Advanced Research, online erschienen am 30.09.2024. Verfasst von Himabindu Ravella und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aims &Objectives: To evaluate Marginal discrepancy and Surface roughness of CAD-CAM Milled and 3D Printed provisional crowns after subjecting them to thermocycling. Materials and Methods: A stainless-steel metal die with ANSI/ADA specifications had been fabricated for the study. It was scanned with an intraoral scanner and the data was sent to VHF S5M CAD CAM milling and R3Pro printing machine. A total of 10 samples Milled Group A(n=10) and 10 Printed Group B(n=10) provisional crowns were fabricated from PMMA material using the scanned data. The temperatures for thermocycling are 37ºC and 60ºC. Each group is subdivided into two subgroups(n=5) based on thermocycling temperatures. The timeduration selected for Thermocycling was 7,14 and21 days. Marginal discrepancy was measured by using Stereomicroscope and Surface roughness was measured with Profilometer.

Results

Marginal discrepancy values were greater in CAD CAM milled crowns(141.47 µm) than in Printed crowns(109.87 µm) at 60ºC after a time-period of 21days.Surface roughness values were higher in Milled crowns(3.915µm) than in CAD CAM Printed crowns(3.817µm) at 60ºC for a given time duration of 21days. One-way ANOVA statistical analysis was done. The mean marginal gap of CAD CAM Milled crowns was statistically significant than Printed crowns(p>0.05).

Conclusion

Printed provisional restorationshad better Marginal accuracythan CAD CAM Milled provisional crowns. Surface roughness was higher in CAD CAM Milled crowns than in Printed provisional restorations.

Zitieren

APA

Ravella, H., Mayakuntla, G. S., Tedlapu, S., Ronaki, S., Vasudha, K., & Adduri, R. (2024). EVALUATING THE MARGINAL DISCREPANCY AND SURFACE ROUGHNESS OF CAD - CAM MILLED VS 3D PRINTED PROVISIONAL CROWNS - AN INVITRO STUDY. International Journal of Advanced Research, 12(09), 356-365. https://doi.org/10.21474/ijar01/19463

Vancouver

Ravella H, Mayakuntla GS, Tedlapu S, Ronaki S, Vasudha K, Adduri R. EVALUATING THE MARGINAL DISCREPANCY AND SURFACE ROUGHNESS OF CAD - CAM MILLED VS 3D PRINTED PROVISIONAL CROWNS - AN INVITRO STUDY. International Journal of Advanced Research. 2024;12(09):356-365. doi:10.21474/ijar01/19463

BibTeX
@article{Ravella2024,
  author = {Ravella, Himabindu and Mayakuntla, Gnana Sruthi and Tedlapu, Satyendra and Ronaki, Sunitha and Vasudha, Kommu and Adduri, Rajasekhar},
  title = {EVALUATING THE MARGINAL DISCREPANCY AND SURFACE ROUGHNESS OF CAD - CAM MILLED VS 3D PRINTED PROVISIONAL CROWNS - AN INVITRO STUDY},
  journal = {International Journal of Advanced Research},
  year = {2024},
  volume = {12},
  number = {09},
  pages = {356--365},
  doi = {10.21474/ijar01/19463}
}
Kostenlos starten →