Physical analysis of an acrylic resin modified by metal and ceramic nanoparticlesles
Dental and Medical Problems · 2023
DOI: 10.17219/dmp/171844 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dental and Medical Problems, 2023. Verfasst von Luciana Machado-Santos und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, School of Dentistry, University of Taubaté, Brazil. Hauptthemen laut MEDLINE: Acrylic Resins, Nanoparticles. Die Arbeit wurde bisher 12-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 3.0).
Abstract (Originalsprache)
BACKGROUND: Nanoparticles (NPs) have gained significant attention in various fields due to their unique properties and potential applications. Polymethyl methacrylate (PMMA) is an acrylic resin widely used in dentistry and medicine. However, the effect of different types of NP fillers on the physical properties of PMMA-based resins has not been thoroughly explored in the literature. OBJECTIVES: The present study aimed to evaluate the effects of 3 different types of NP fillers on the physical properties of an experimental PMMA-based resin as a function of the NP content and concentration. MATERIAL AND METHODS: Ten groups (n = 10) were designed. The specimens were composed of an acrylic resin, silicon dioxide (SiO2), cerium dioxide (CeO2), and titanium dioxide (TiO2) at the following ratios (wt%): group 1 (G1) - control; group 2 (G2) - 0.5% SiO2; group 3 (G3) - 1% SiO2; group 4 (G4) - 3% SiO2; group 5 (G5) - 0.5% CeO2; group 6 (G6) - 1% CeO2; group 7 (G7) - 3% CeO2; group 8 (G8) - 0.5% TiO2; group 9 (G9) - 1% TiO2; and group 10 (G10) - 3% TiO2. Transmission electron microscopy (TEM) was used to assess the quality of NP dispersion. Thermal stability was assessed with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The effects of the abovementioned NPs on the properties of the resin were evaluated using the Archimedes principle for density, the Vickers hardness (VH) test and the impact strength (IS) test. Data analysis employed the oneand two-way analysis of variance (ANOVA), followed by Duncan's post hoc test at a significance level of 0.05. RESULTS: Transmission electron microscopy showed partial NP dispersion. All types of NPs enhanced the mechanical properties of the acrylic resin except for IS, which was similar to that of the control group. Among the types of NPs, irrespective of the weight percentage, CeO2 showed higher thermal stability and higher IS for 0.5 wt% and 1 wt% as compared to other groups, as well as the highest values of density at 0.5 wt%, 1 wt% and 3 wt%. Titanium oxide at 1 wt% presented a higher VH as compared to other groups. The fracture pattern was the same for all groups. CONCLUSIONS: Incorporating the tested NPs into the acrylic resin resulted in enhanced physical properties, primarily attributed to a lower NP content.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Restorative Dentistry, School of Dentistry, University of Taubaté, Brazil.
- RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al Khaimah, UAE.
- Department of Dentistry, School of Medical Sciences, University of Manchester, UK.
- Department of Reconstructive Oral Care, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit van Amsterdam and Vrije Universiteit Amsterdam, Amsterdam, the Netherlands.
- Department of Dental Materials, Piracicaba Dental School, State University of Campinas, Brazil.
- Department of Dentistry, University of Santo Amaro, São Paulo, Brazil.
Zitieren
APA
Machado-Santos, L., Baroudi, K., Silikas, N., Tribst, J. P. M., Coelho Sinhoreti, M. A., Brandt, W. C., & Liporoni, P. C. S. (2023). Physical analysis of an acrylic resin modified by metal and ceramic nanoparticlesles. Dental and Medical Problems. https://doi.org/10.17219/dmp/171844
Vancouver
Machado-Santos L, Baroudi K, Silikas N, Tribst JPM, Coelho Sinhoreti MA, Brandt WC, et al. Physical analysis of an acrylic resin modified by metal and ceramic nanoparticlesles. Dental and Medical Problems. 2023. doi:10.17219/dmp/171844
BibTeX
@article{MachadoSantos2023,
author = {Machado-Santos, Luciana and Baroudi, Kusai and Silikas, Nikolaos and Tribst, João Paulo Mendes and Coelho Sinhoreti, Mario Alexandre and Brandt, William Cunha and Liporoni, Priscila Christiane Suzy},
title = {Physical analysis of an acrylic resin modified by metal and ceramic nanoparticlesles},
journal = {Dental and Medical Problems},
year = {2023},
doi = {10.17219/dmp/171844}
}
EUVIMED