EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the flexural strength of orthodontic acrylic resin incorporated with propolis nanoparticles: an in vitro study

Azam Akhavan, Sepideh Arab, Negin Eslamiamirabadi, Ahmad Sodagar, Fatemeh Safari iD

Folia Medica · 2023

DOI: 10.3897/folmed.65.e90085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Folia Medica, 2023. Verfasst von Azam Akhavan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Nuclear Science and Technology Research Institute, Tehran, Iran. Hauptthemen laut MEDLINE: Propolis, Nanoparticles. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

Nanopropolis has become the subject of interest in medicine and dentistry as a natural product due to its outstanding properties, particularly antimicrobial activity. This study aimed at investigating the effect of nanopropolis on flexural strength of polymethyl methacrylate (PMMA). Materials and methods : Three groups of two acrylic resin brands namely Acropars and Triplex containing 0 (control group), 0.5%, and 1% of nanopropolis were prepared in 64×10.0×3.3 mm according to ISO 20795-2 (2013). Fifteen samples were allocated to each concentration. Flexural strength was determined following immersion in water and incubation at 37°C for 50±2 hours using a universal testing machine at a crosshead speed of 5±1 mm/min. Data were analyzed using ANOVA, Tukey HSD, and t -test. P <0.05 was set as statistical significance.

Results

Control groups of Acropars and Triplex showed the highest mean flexural strength within their own group which both were higher than the recommended 50 MPa. The mean flexural strength of Triplex incorporated with 0.5 and 1% of nanopropolis was higher than that of Acropars with the same percentage.

Conclusions

The mean flexural strength of Triplex remained above the recommended value of 50 MPa after incorporation of both 0.5 and 1% nanopropolis. However, that of Acropars dropped below it.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PropolisNanoparticlesFlexural StrengthMaterials TestingAcrylic ResinsDenture BasesPolymethyl MethacrylateSurface Properties

Stichwörter der Autor:innen

acrylic resin flexural strength nanopropolis

Substanzen

PropolisAcrylic ResinsPolymethyl Methacrylate

Autor:innen und Institutionen

  • Nuclear Science and Technology Research Institute, Tehran, Iran.
  • Tehran University of Medical Sciences, Tehran, Iran.
  • McGill University, Montréal, Canada.

ORCID-Profile: Fatemeh Safari

Zitieren

APA

Akhavan, A., Arab, S., Eslamiamirabadi, N., Sodagar, A., & Safari, F. (2023). Evaluation of the flexural strength of orthodontic acrylic resin incorporated with propolis nanoparticles: an in vitro study. Folia Medica. https://doi.org/10.3897/folmed.65.e90085

Vancouver

Akhavan A, Arab S, Eslamiamirabadi N, Sodagar A, Safari F. Evaluation of the flexural strength of orthodontic acrylic resin incorporated with propolis nanoparticles: an in vitro study. Folia Medica. 2023. doi:10.3897/folmed.65.e90085

BibTeX
@article{Akhavan2023,
  author = {Akhavan, Azam and Arab, Sepideh and Eslamiamirabadi, Negin and Sodagar, Ahmad and Safari, Fatemeh},
  title = {Evaluation of the flexural strength of orthodontic acrylic resin incorporated with propolis nanoparticles: an in vitro study},
  journal = {Folia Medica},
  year = {2023},
  doi = {10.3897/folmed.65.e90085}
}
Kostenlos starten →