EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid coating prepared with PMMA/Ti-O-Si tested under vacuum conditions for use in nanosatellites

Bryanda G Reyes-Tesillo, Genoveva Hernández-Padrón iD, Jorge A Ferrer-Pérez iD, Alfredo Maciel-Cerda

PLOS ONE · 2025

DOI: 10.1371/journal.pone.0313785 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2025. Verfasst von Bryanda G Reyes-Tesillo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Posgrado en Ciencia e Ingeniería de Materiales, Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México Campus Juriq…. Hauptthemen laut MEDLINE: Polymethyl Methacrylate, Titanium. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A hybrid coating made of poly (methyl methacrylate) with SiO 2 -TiO 2 particles (PMMA/SiO 2 -TiO 2 ) has been developed for use as a coating on nanosatellites, evaluating its resistance to high vacuum by quantifying its weight loss. The coating was applied on an Al 7075 aluminum substrate used for the aerospace sector. PMMA/SiO 2 -TiO 2 hybrid coatings were prepared using sol-gel reaction in situ assisted with sonochemistry. The SiO 2 particles and TiO 2 (50:50% wt. of rutile/anatase) particles by tetraethyl orthosilicate (TEOS), and Titanium (IV) Isopropoxide (TIPO). Radical polymerization of methyl methacrylate (MMA) monomer was conducted with (3-mercaptopropyl) trimethoxy silane (3-MPTS) used as a coupling molecular agent, and benzoyl peroxide as a catalyst. The coatings obtained have a thickness of 20 μm which were deposited by blade coating technique on the substrate, obtaining homogeneous and defect-free coatings. Adhesion and hardness were measured using ASTM standards required for this sector. To evaluate its resistance to ultra-high vacuum, it was done as close as possible to the ASTM E-595 norm [1], where it indicates that the coatings must be evaluated at vacuum conditions of 10 −5 Torr and 125°C for a period of 24 hours. The coatings were evaluated before and after the test by spectroscopy analysis to determine a possible degradation in the chemical structure. The resulting weight loss not exceeding 0.02%, and the addition of Ti-O-Si particles led to an increase in chemical stability under vacuum conditions without affecting the chemical structure of the highly cross-linked PMMA/Ti-O-Si matrix, which was monitored by FTIR and Raman spectroscopy.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polymethyl MethacrylateTitaniumVacuumSilicon DioxideMaterials TestingNanoparticlesSurface Properties

Substanzen

Polymethyl MethacrylateTitaniumtitanium dioxideSilicon Dioxide

Autor:innen und Institutionen

  • Posgrado en Ciencia e Ingeniería de Materiales, Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México Campus Juriquilla Querétaro, Querétaro, México.
  • Departamento de Nanomateriales, Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México Campus Juriquilla Querétaro, Querétaro, México.
  • Departamento de Ingeniería Aeroespacial, Unidad de Alta Tecnología-Facultad de Ingeniería, Universidad Nacional Autónoma de México Campus Juriquilla Querétaro, Querétaro, México.
  • Departamento de Reología y Mecánica de Materiales, Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México Ciudad Universitaria, Ciudad de México, México.

ORCID-Profile: Genoveva Hernández-Padrón, Jorge A Ferrer-Pérez

Zitieren

APA

Reyes-Tesillo, B. G., Hernández-Padrón, G., Ferrer-Pérez, J. A., & Maciel-Cerda, A. (2025). Hybrid coating prepared with PMMA/Ti-O-Si tested under vacuum conditions for use in nanosatellites. PLOS ONE. https://doi.org/10.1371/journal.pone.0313785

Vancouver

Reyes-Tesillo BG, Hernández-Padrón G, Ferrer-Pérez JA, Maciel-Cerda A. Hybrid coating prepared with PMMA/Ti-O-Si tested under vacuum conditions for use in nanosatellites. PLOS ONE. 2025. doi:10.1371/journal.pone.0313785

BibTeX
@article{ReyesTesillo2025,
  author = {Reyes-Tesillo, Bryanda G and Hernández-Padrón, Genoveva and Ferrer-Pérez, Jorge A and Maciel-Cerda, Alfredo},
  title = {Hybrid coating prepared with PMMA/Ti-O-Si tested under vacuum conditions for use in nanosatellites},
  journal = {PLOS ONE},
  year = {2025},
  doi = {10.1371/journal.pone.0313785}
}
Kostenlos starten →