EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Influence of Light-Curing Parameters on the Bond Strength of Bulk-Fill Repaired Microhybrid Resin Composite

Anderson Kaian de Lima Maniçoba, Luan Gabriel Chaves Damasceno, Susana Joice Mendes Maia, Marília Regalado Galvão Rabelo Caldas, Vicente de Paulo Aragão Saboia, Boniek Castillo Dutra Borges, Diana Ferreira Gadelha de Araújo

Odovtos - International Journal of Dental Sciences · 04.11.2026 · 1 (1)

DOI: 10.15517/3p8v9928 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Odovtos - International Journal of Dental Sciences, online erschienen am 04.11.2026. Verfasst von Anderson Kaian de Lima Maniçoba und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0). Gefördert von: Universidade Federal do Rio Grande do Norte,Universidade Federal do Rio Grande do Norte.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated the influence of photoactivation parameters, specifically radiant exposure and curing distance, on the microtensile bond strength (μTBS) of a microhybrid resin composite repaired with a bulk-fill composite. Seventy-two conventional resin composite blocks were prepared and thermocycled (10,000 cycles). Three light-curing modes were evaluated based on their clinical parameters: Standard (1000 mW/cm2, 20s), High Power (1400 mW/cm2, 8s), and Xtra Power (3200 mW/cm2, 6s). Specimen surfaces were ground with a diamond bur, etched with 35% phosphoric acid, and treated with a 2-step etch-and-rinse adhesive system (Adper Single Bond 2) before repairs were made with a bulk-fill composite. Specimens (n=12 per group) were divided based on the three irradiances and two curing distances (0 and 2 mm). After 14 days of water storage, μTBS was tested. Data were analyzed using two-way ANOVA (α=0.05). Curing distance significantly influenced μTBS, with higher values at 0 mm (p

Förderung

  • Universidade Federal do Rio Grande do Norte,Universidade Federal do Rio Grande do Norte

Zitieren

APA

Maniçoba, A. K. D. L., Damasceno, L. G. C., Maia, S. J. M., Caldas, M. R. G. R., Saboia, V. D. P. A., Borges, B. C. D., & Araújo, D. F. G. D. (2026). Influence of Light-Curing Parameters on the Bond Strength of Bulk-Fill Repaired Microhybrid Resin Composite. Odovtos - International Journal of Dental Sciences, 1(1). https://doi.org/10.15517/3p8v9928

Vancouver

Maniçoba AKDL, Damasceno LGC, Maia SJM, Caldas MRGR, Saboia VDPA, Borges BCD, et al. Influence of Light-Curing Parameters on the Bond Strength of Bulk-Fill Repaired Microhybrid Resin Composite. Odovtos - International Journal of Dental Sciences. 2026;1(1). doi:10.15517/3p8v9928

BibTeX
@article{Manioba2026,
  author = {Maniçoba, Anderson Kaian de Lima and Damasceno, Luan Gabriel Chaves and Maia, Susana Joice Mendes and Caldas, Marília Regalado Galvão Rabelo and Saboia, Vicente de Paulo Aragão and Borges, Boniek Castillo Dutra and Araújo, Diana Ferreira Gadelha de},
  title = {Influence of Light-Curing Parameters on the Bond Strength of Bulk-Fill Repaired Microhybrid Resin Composite},
  journal = {Odovtos - International Journal of Dental Sciences},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.15517/3p8v9928}
}
Kostenlos starten →