Low-cost 3D printed lenses for brightfield and fluorescence microscopy
Biomedical Optics Express · 2024-04-01 · 15 (4) · 2224
DOI: 10.1364/boe.514653 ↗At a glance
Journal article in Biomedical Optics Express, published online on 2024-03-07. Written by Jay Christopher and 5 co-authors. Institution: Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK. Cited 28 times so far (Crossref); 25 references. The full text is freely available (open access, CC BY 4.0). Funded by: UK Research and Innovation, Royal Academy of Engineering, Medical Research Council.
Abstract (original language)
We present the fabrication and implementation of low-cost optical quality 3D printed lenses, and their application as microscope objectives with different prescriptions. The imaging performance of the 3D printed lenses was benchmarked against commercially available optics including a 20 mm focal length 12.7 mm diameter NBK-7 plano-convex lens used as a low magnification objective, and a separate high magnification objective featuring three 6 mm diameter NBK-7 lenses with different positive and negative focal lengths. We describe the design and manufacturing processes to produce high-quality 3D printed lenses. We tested their surface quality using a stylus profilometer, showing that they conform to that of commercial glass counterpart lenses. The 3D printed lenses were used as microscope objectives in both brightfield and epi-fluorescence imaging of specimens including onion, cyanobacteria, and variegated Hosta leaves, demonstrating a sub-cellular resolution performance obtained with low-cost 3D printed optical elements within brightfield and fluorescence microscopy.
Authors and institutions
- Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK.
- Strathclyde Institute of Pharmacy and Biomedical Sciences, University of Strathclyde, Glasgow, UK.
ORCID profiles: Jay Christopher, Gail McConnell, Ralf Bauer
Funding
- UK Research and Innovation
- Royal Academy of Engineering
- Medical Research Council
- Biotechnology and Biological Sciences Research Council
- Leverhulme Trust
Cite
APA
Christopher, J., Rooney, L. M., Donnachie, M., Uttamchandani, D., McConnell, G., & Bauer, R. (2024). Low-cost 3D printed lenses for brightfield and fluorescence microscopy. Biomedical Optics Express, 15(4), 2224. https://doi.org/10.1364/boe.514653
Vancouver
Christopher J, Rooney LM, Donnachie M, Uttamchandani D, McConnell G, Bauer R. Low-cost 3D printed lenses for brightfield and fluorescence microscopy. Biomedical Optics Express. 2024;15(4):2224. doi:10.1364/boe.514653
BibTeX
@article{Christopher2024,
author = {Christopher, Jay and Rooney, Liam M and Donnachie, Mark and Uttamchandani, Deepak and McConnell, Gail and Bauer, Ralf},
title = {Low-cost 3D printed lenses for brightfield and fluorescence microscopy},
journal = {Biomedical Optics Express},
year = {2024},
volume = {15},
number = {4},
pages = {2224},
doi = {10.1364/boe.514653}
}
EUVIMED