EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices

Mathias Stahl Kavai, José Alberto Fracassi da Silva

Hardware · 08.04.2026 · 4 (2) · 8

DOI: 10.3390/hardware4020008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Hardware, online erschienen am 08.04.2026. Verfasst von Mathias Stahl Kavai und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: São Paulo Research Foundation, CAPES, National Council for Scientific and Technological Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lab-on-a-chip devices offer high efficiency, low volume and fast analytical measurement, but their use is still niche. A key component for these devices is the detector, and one common type of detection is fluorescence spectroscopy. However, in some cases the detector can be bulky and lose the appeal of small-footprint devices. To make lab-on-a-chip devices truly compact, detectors must also be compact. In this paper we discuss the use of simple and low-cost commercial multispectral sensors for use in lab-on-a-chip devices, more specifically for fluorescence detection, which we demonstrate to allow detection on nanomolar scale with a simple experimental setup.

Förderung

  • São Paulo Research Foundation
  • CAPES
  • National Council for Scientific and Technological Development

Zitieren

APA

Kavai, M. S., & Silva, J. A. F. D. (2026). Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices. Hardware, 4(2), 8. https://doi.org/10.3390/hardware4020008

Vancouver

Kavai MS, Silva JAFD. Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices. Hardware. 2026;4(2):8. doi:10.3390/hardware4020008

BibTeX
@article{Kavai2026,
  author = {Kavai, Mathias Stahl and Silva, José Alberto Fracassi da},
  title = {Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices},
  journal = {Hardware},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {8},
  doi = {10.3390/hardware4020008}
}
Kostenlos starten →