Low-cost 3D-printed optics for super-resolution multifocal structured illumination microscopy
Biomedical Optics Express · 01.02.2026 · 17 (2) · 769
DOI: 10.1364/boe.583760 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomedical Optics Express, online erschienen am 13.01.2026. Verfasst von Jay Christopher und 4 weiteren Autor:innen. Beteiligte Einrichtung: Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Medical Research Council, Biotechnology and Biological Sciences Research Council.
Abstract (Originalsprache)
We present a low-cost 3D-printing method of fabricating optical quality lenslet arrays for integration in a multifocal structured illumination microscope (mSIM), achieving super-resolution fluorescence imaging using 3D-printed optics for the first time. We detail the design and manufacturing processes to produce high-quality 3D-printed optics, showing their comparable surface roughness of 30 ± 2.5 nm for the 3D-printed elements compared to 37 ± 1.4 nm for commercial glass optics. A 3D-printed lenslet array with a ‘honeycomb’ geometry and 1.2 mm lenslet diameter was compared to a high-end glass commercial lenslet array with 250 µm lenslet diameter and a lower cost commercial lenslet array with a 1 mm by 1.4 mm lenslet footprint. The imaging performance of the different optics was benchmarked using a custom mSIM setup by quantifying the beam profile homogeneity and the experimental lateral resolution. The mSIM setup incorporating the different microlens arrays was tested using a commercial bovine pulmonary artery endothelial cell specimen, highlighting an achievable resolution enhancement from 237 nm ± 12 nm with laser-scanning illumination to 151 ± 12 nm using the high-end commercial microlens array and from 232 ± 18 nm with laser-scanning illumination to 151 nm ± 12 nm using the 3D-printed honeycomb lenslet array. Advantages of improved background rejection through the custom lenslet geometry are discussed, highlighting the super-resolution microscope performance achievable using custom 3D-printed optics costing as low as £0.50 to produce.
Autor:innen und Institutionen
- Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK.
- School of Infection & Immunity, University of Glasgow, Glasgow, UK.
- Strathclyde Institute of Pharmacy and Biomedical Sciences, University of Strathclyde, Glasgow, UK.
ORCID-Profile: Jay Christopher, Gail McConnell, Ralf Bauer
Förderung
- Engineering and Physical Sciences Research Council
- Medical Research Council
- Biotechnology and Biological Sciences Research Council
- Leverhulme Trust
Zitieren
APA
Christopher, J., Rooney, L. M., Butterworth, C., McConnell, G., & Bauer, R. (2026). Low-cost 3D-printed optics for super-resolution multifocal structured illumination microscopy. Biomedical Optics Express, 17(2), 769. https://doi.org/10.1364/boe.583760
Vancouver
Christopher J, Rooney LM, Butterworth C, McConnell G, Bauer R. Low-cost 3D-printed optics for super-resolution multifocal structured illumination microscopy. Biomedical Optics Express. 2026;17(2):769. doi:10.1364/boe.583760
BibTeX
@article{Christopher2026,
author = {Christopher, Jay and Rooney, Liam M and Butterworth, Charlie and McConnell, Gail and Bauer, Ralf},
title = {Low-cost 3D-printed optics for super-resolution multifocal structured illumination microscopy},
journal = {Biomedical Optics Express},
year = {2026},
volume = {17},
number = {2},
pages = {769},
doi = {10.1364/boe.583760}
}
EUVIMED