Low–Cost 3D–Printed Standard Gain Horn Antennas for Millimetre–Wave Applications
Journal of Manufacturing and Materials Processing · 01.07.2025 · 9 (7) · 222
DOI: 10.3390/jmmp9070222 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 01.07.2025. Verfasst von Shaker Alkaraki und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Research Council.
Abstract (Originalsprache)
This paper presents additively manufactured (3D printed) several standard gain horn antennas which have been designed to ensure simple and low–cost fabrication. In order to validate the proposed manufacturing approach, we have designed a number of antennas covering the entire frequency range from 26 GHz to 110 GHz. The proposed antennas have been prototyped and measured. They were found to yield very good performance when compared to commercially available standard gain horn antennas. Unlike metallic standard gain horns antennas, whose manufacturing cost increases as the frequency goes high due to fabrication challenges, the cost of fabricating 3D–printed antennas goes actually down as the frequency increases (up to 110 GHz). The measured performances, in terms of return loss, radiation patterns and gain, of these fabricated 3D printed antennas agree remarkably well with the measured results for commercially available standard gain horns antennas.
Förderung
- Engineering and Physical Research Council
Zitieren
APA
Alkaraki, S., Khan, Z. U., Jilani, S. F., Sarker, A. A., Kelly, J. R., & Alomainy, A. (2025). Low–Cost 3D–Printed Standard Gain Horn Antennas for Millimetre–Wave Applications. Journal of Manufacturing and Materials Processing, 9(7), 222. https://doi.org/10.3390/jmmp9070222
Vancouver
Alkaraki S, Khan ZU, Jilani SF, Sarker AA, Kelly JR, Alomainy A. Low–Cost 3D–Printed Standard Gain Horn Antennas for Millimetre–Wave Applications. Journal of Manufacturing and Materials Processing. 2025;9(7):222. doi:10.3390/jmmp9070222
BibTeX
@article{Alkaraki2025,
author = {Alkaraki, Shaker and Khan, Zia Ullah and Jilani, Syeda Fizzah and Sarker, Andy Andre and Kelly, James R. and Alomainy, Akram},
title = {Low–Cost 3D–Printed Standard Gain Horn Antennas for Millimetre–Wave Applications},
journal = {Journal of Manufacturing and Materials Processing},
year = {2025},
volume = {9},
number = {7},
pages = {222},
doi = {10.3390/jmmp9070222}
}
EUVIMED