EUVIMEDSkopri EUVIMED
Vergleichsstudie

Evaluating the Technical Properties and Fracture Surfaces of Interim Restorative Materials Produced by Different Three-Dimensional Printer Technologies: An In-Vitro Study

Mehmet Ünal, Ebru Sürer, Yurdanur Ucar, Esma Başak Gül Aygün

International Journal of Prosthodontics · 2025

DOI: 10.11607/ijp.9206 ↗

At a glance

Vergleichsstudie in International Journal of Prosthodontics, 2025. Written by Mehmet Ünal and 3 co-authors. Major MEDLINE topics: Computer-Aided Design, Dental Materials.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

PURPOSE: To compare the mechanical properties of interim restorative materials produced using stereolithography (SLA), digital light processing (DLP), and liquid crystal display (LCD) technologies with specimens produced by milling and conventionally manufactured polymethyl methacrylate (PMMA). MATERIALS AND METHODS: Six different 3D printers-two brands for each of SLA (Formlabs [FL] and DWS Systems [DWS]), DLP (Asiga [AS] and Mega [MG]), and LCD (Vega [VG] and Photon [PH]) technologies-were used as experimental groups, and milling (Tempo-Cad, Ondent) and conventional (autopolymerizing PMMA, Imident, Imicryl) methods were used as controls. According to International Standards Organization (ISO) 10477:2004, 120 rectangular prism interim resin specimens with dimensions of 25 × 2 × 2 mm were prepared. The manufactured specimens were subjected to three-point bending and microhardness tests, and Weibull analysis was performed. Fracture surface analysis was performed using SEM (FEI Quanta 650). Statistical data analysis was performed with one-way ANOVA and post hoc Dunnett T3 test (α = .05). RESULTS: The mean flexural strength value of the milling group was statistically significantly higher than all other groups (P < .05) except the FL group (P = 1.000). The mean elastic modulus values of DWS, FL, AS, VG, and conventional groups were not statistically significantly different from the milling group. All 3D-printer groups except PH showed a statistically significantly higher microhardness value than the conventional group. CONCLUSIONS: All the interim resin materials produced with six different 3D printers constituted a good alternative to the conventional method. However, only resin material produced with FL showed similar mechanical properties to the milling method.

Subjects

MeSH terms (MEDLINE)

Computer-Aided DesignDental MaterialsMaterials TestingSurface PropertiesPolymethyl MethacrylateHardnessIn Vitro TechniquesFlexural StrengthDental Stress Analysis

Substances

Polymethyl MethacrylateDental Materials

Cite

APA

Ünal, M., Sürer, E., Ucar, Y., & Aygün, E. B. G. (2025). Evaluating the Technical Properties and Fracture Surfaces of Interim Restorative Materials Produced by Different Three-Dimensional Printer Technologies: An In-Vitro Study. International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9206

Vancouver

Ünal M, Sürer E, Ucar Y, Aygün EBG. Evaluating the Technical Properties and Fracture Surfaces of Interim Restorative Materials Produced by Different Three-Dimensional Printer Technologies: An In-Vitro Study. International Journal of Prosthodontics. 2025. doi:10.11607/ijp.9206

BibTeX
@article{nal2025,
  author = {Ünal, Mehmet and Sürer, Ebru and Ucar, Yurdanur and Aygün, Esma Başak Gül},
  title = {Evaluating the Technical Properties and Fracture Surfaces of Interim Restorative Materials Produced by Different Three-Dimensional Printer Technologies: An In-Vitro Study},
  journal = {International Journal of Prosthodontics},
  year = {2025},
  doi = {10.11607/ijp.9206}
}
Start for free →