Evaluation of the Mechanical Properties of Provisional 3DPrinted Resin After Repair with Different Materials: An In-Vitro Study
The International Journal of Prosthodontics · 2024
DOI: 10.11607/ijp.9172 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Prosthodontics, 2024. Verfasst von Selin Çelik Öge und 3 weiteren Autor:innen. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Composite Resins, Dental Materials, Dental Restoration, Temporary.
Abstract (Originalsprache)
PURPOSE: To evaluate the mechanical properties of the 3D-printed provisional restoration material after it was repaired using different materials. MATERIALS AND METHODS: Bar specimens were manufactured using 3D-printing technology in accordance with the ISO 10477:2020 standards and divided into five groups randomly. For repair material application and replacement on the standardized silicone mold, the test specimens were ground at the center by 1 × 2 × 2 mm. No grinding was done on the control group specimens. Flowable composite, bis-acryl composite resin, polymethyl methacrylate resin, and temporary 3D-printing resin were used as repair materials (n = 16). The specimens underwent a three-point bending (3PB) test with a crosshead speed of 1 mm/minute to assess their flexural strength (FS) and flexural modulus (FM). The data received statistical analysis with one-way ANOVA and Tukey test. Weibull analysis was performed, and the Weibull modulus of the specimens was calculated. RESULTS: Control group specimens showed the highest FS (142 ± 12.6 MPa) and FM (4,497 ± 1,205 MPa) values. Among the test groups, the use of temporary 3D-printing resin as a repair material exhibited the greatest FS (67 ± 33.3 MPa) values and showed statistical significance when compared to all other groups. CONCLUSIONS: Repairing 3D-printed provisional resin material weakens its mechanical properties. However, using the original 3D-printed provisional resin material can be an effective choice for implementing minor modifications and additions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Zitieren
APA
Öge, S. Ç., Erdem, C. A., Eser, M., & Ekren, O. (2024). Evaluation of the Mechanical Properties of Provisional 3DPrinted Resin After Repair with Different Materials: An In-Vitro Study. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9172
Vancouver
Öge SÇ, Erdem CA, Eser M, Ekren O. Evaluation of the Mechanical Properties of Provisional 3DPrinted Resin After Repair with Different Materials: An In-Vitro Study. The International Journal of Prosthodontics. 2024. doi:10.11607/ijp.9172
BibTeX
@article{ge2024,
author = {Öge, Selin Çelik and Erdem, Cafer Anıl and Eser, Murat and Ekren, Orhun},
title = {Evaluation of the Mechanical Properties of Provisional 3DPrinted Resin After Repair with Different Materials: An In-Vitro Study},
journal = {The International Journal of Prosthodontics},
year = {2024},
doi = {10.11607/ijp.9172}
}
EUVIMED