EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of tooth fracture load between different conventional and CAD‐CAM denture base materials

Eman Al Kaba iD, Amal Alfaraj iD, Tien-Min G Chu iD, Dean Morton iD, Dhafer Alqahtani iD, Wei-Shao Lin iD, Chao-Chieh Yang iD

Journal of Prosthodontics · 07.07.2026

DOI: 10.1111/jopr.70187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 07.07.2026. Verfasst von Eman Al Kaba und 6 weiteren Autor:innen. Beteiligte Einrichtung: Center for Implant, Esthetic and Innovative Dentistry, Indiana University School of Dentistry, Indianapolis, Indiana, USA. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To assess the fracture load at the tooth‐denture base interface in dentures fabricated using three different production methods: compression mold, computer‐aided design and computer‐aided manufacturing (CAD‐CAM) milled (monolithic and bonded), and 3D‐ printed dentures (monolithic and bonded). Materials and Methods Seven groups ( n = 10/group) were fabricated using a standardized segmented digital denture design that included tooth #8. Fabrication techniques included conventional compression molding, single, two‐disc milling or with bonded tooth designs, and 3D printing monolithic or with bonded tooth designs, utilizing either prefabricated, milled, or 3D‐printed teeth. Specimens were embedded in cylindrical molds exposing 2 mm of the denture base and subjected to fracture load testing. Failure modes were analyzed via scanning electron microscopy and classified as adhesive, cohesive, or mixed. One‐way analysis of variance with Fisher's LSD was used to compare fracture loads among groups.

Results

Statistical analysis revealed significant differences in fracture load among the seven denture fabrication methods ( p < 0.001). The monolithic milled group demonstrated the highest fracture load (504.7 ± 76 N) and reliability, as confirmed by Weibull analysis. Both 3D‐printed denture bases with bonded teeth groups also showed high fracture load values (361.2 ± 0.4 and 348.7 ± 0.8 N, respectively), outperforming the conventional group ( p < 0.001, p = 0.002). Milled base with bonded milled tooth and monolithic print exhibited moderate fracture load. In contrast, compression‐molded and milled base with bonded prefabricated tooth exhibited the lowest fracture load (251.7 ± 69.6 and 232.8 ± 47.7 N, respectively). Fracture modes varied, with cohesive failures more evident in stronger groups and adhesive or mixed failures in weaker ones.

Conclusion

Denture fabrication method had a significant effect on tooth–base fracture load. Monolithic CAD‐CAM‐milled denture outperformed all other groups in denture teeth fracture load. 3D‐printed techniques with optimized bonding also achieved high fracture load exceeding conventional compression‐molded dentures.

Schlagwörter

Stichwörter der Autor:innen

3D printingCAD‐CAM denturefracture loadmonolithic denturestooth debonding

Autor:innen und Institutionen

  • Center for Implant, Esthetic and Innovative Dentistry, Indiana University School of Dentistry, Indianapolis, Indiana, USA.
  • Department of Prosthodontics, College of Dentistry, King Faisal University, Al Ahsa, Saudi Arabia.
  • Department of Biomedical and Applied Sciences, Indiana University School of Dentistry, Indianapolis, Indiana, USA.
  • Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, Indiana, USA.
  • Department of Prosthodontics, College of Dentistry, Najran University, Najran, Saudi Arabia.

ORCID-Profile: Eman Al Kaba, Amal Alfaraj, Tien-Min G Chu, Dean Morton, Dhafer Alqahtani, Wei-Shao Lin, Chao-Chieh Yang

Zitieren

APA

Kaba, E. A., Alfaraj, A., Chu, T. G., Morton, D., Alqahtani, D., Lin, W. S., & Yang, C. C. (2026). Comparison of tooth fracture load between different conventional and CAD‐CAM denture base materials. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70187

Vancouver

Kaba EA, Alfaraj A, Chu TG, Morton D, Alqahtani D, Lin WS, et al. Comparison of tooth fracture load between different conventional and CAD‐CAM denture base materials. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70187

BibTeX
@article{Kaba2026,
  author = {Kaba, Eman Al and Alfaraj, Amal and Chu, Tien-Min G and Morton, Dean and Alqahtani, Dhafer and Lin, Wei-Shao and Yang, Chao-Chieh},
  title = {Comparison of tooth fracture load between different conventional and CAD‐CAM denture base materials},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70187}
}
Kostenlos starten →