EUVIMEDEUVIMED entdecken
Crossref

Fatigue behavior of multilayer ceramic structures in traditional and reverse layering designs

Lisseth Patricia Claudio Contreras, Camila Silva Rodrigues iD, Camila Pauleski Zucuni, Luiz Felipe Valandro, Susana Maria Salazar Marocho, Renata Marques de Melo

Journal of Prosthodontics · 2024

DOI: 10.1111/jopr.13705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2024. Verfasst von Lisseth Patricia Claudio Contreras und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Materials and Prosthodontics, Institute of Science and Technology, São Paulo State University (UNESP), São José dos Campos, São …. Hauptthemen laut MEDLINE: Ceramics, Dental Porcelain. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Brazilian Federal Agency for Coordination of Improvement of Higher Education Personnel (CAPES), The São Paulo Research Foundation (FAPESP).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study evaluated the fatigue failure load (FFL) and the number of cycles for fatigue failure (CFF) of traditional (porcelain layer up) and reversed (zirconia layer up) designs of porcelain‐veneered zirconia samples prepared with heat‐pressing or file‐splitting techniques. Materials and Methods Zirconia discs were prepared and veneered with heat‐pressed or machined feldspathic ceramic. The bilayer discs were bonded onto a dentin‐analog according to the bilayer technique and sample design: traditional heat‐pressing (T‐HP), reversed heat‐pressing (R‐HP), traditional file‐splitting with fusion ceramic (T‐FC), reversed file‐splitting with fusion ceramic R‐FC), traditional file‐splitting with resin cement (T‐RC), and reversed file‐splitting with resin cement (R‐RC). The fatigue tests were performed using the stepwise approach at 20 Hz, 10,000 cycles/step, step‐size of 200 N starting at 600 N, and proceeding until failure detection or up to 2600 N if enduring. The failure modes (from radial and/or cone cracks) were analyzed in a stereomicroscope.

Results

The reversed design decreased the FFL and CFF of bilayers prepared with heat‐pressing and file‐splitting with fusion ceramic. The T‐HP and T‐FC reached the highest results, which were statistically similar between them. The bilayers prepared by the file‐splitting with resin cement (T‐RC and R‐RC) were similar to the R‐FC and R‐HP groups regarding FFL and CFF. Almost all reverse layering samples failed by radial cracks.

Conclusions

The reverse layering design did not improve the fatigue behavior of porcelain veneered zirconia samples. The three bilayer techniques behaved similarly when used in the reversed design.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsDental PorcelainCrownsResin CementsMaterials TestingSurface PropertiesDental Stress AnalysisZirconiumDental Restoration Failure

Stichwörter der Autor:innen

bilayer crownsbioinspirationdental ceramicsporcelain‐veneered zirconia

Substanzen

Dental Porcelainzirconium oxideResin CementsZirconium

Autor:innen und Institutionen

  • Department of Dental Materials and Prosthodontics, Institute of Science and Technology, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil.
  • Graduate Program in Dentistry, Federal University of Pelotas (UFPel), Pelotas, Rio Grande do Sul, Brazil.
  • Department of Restorative Dentistry, Federal University of Santa Maria (UFSM), Santa Maria, Rio Grande do Sul, Brazil.
  • Department of Biomedical Materials Science, University of Mississippi Medical Center, Jackson, Mississippi, USA.

ORCID-Profile: Camila Silva Rodrigues

Förderung

  • Brazilian Federal Agency for Coordination of Improvement of Higher Education Personnel (CAPES)
  • The São Paulo Research Foundation (FAPESP)

Zitieren

APA

Contreras, L. P. C., Rodrigues, C. S., Zucuni, C. P., Valandro, L. F., Marocho, S. M. S., & de Melo, R. M. (2024). Fatigue behavior of multilayer ceramic structures in traditional and reverse layering designs. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13705

Vancouver

Contreras LPC, Rodrigues CS, Zucuni CP, Valandro LF, Marocho SMS, de Melo RM. Fatigue behavior of multilayer ceramic structures in traditional and reverse layering designs. Journal of Prosthodontics. 2024. doi:10.1111/jopr.13705

BibTeX
@article{Contreras2024,
  author = {Contreras, Lisseth Patricia Claudio and Rodrigues, Camila Silva and Zucuni, Camila Pauleski and Valandro, Luiz Felipe and Marocho, Susana Maria Salazar and de Melo, Renata Marques},
  title = {Fatigue behavior of multilayer ceramic structures in traditional and reverse layering designs},
  journal = {Journal of Prosthodontics},
  year = {2024},
  doi = {10.1111/jopr.13705}
}
Kostenlos starten →