Shear Bond Strength of Five Different Repair Systems to Three Different Ceramic Materials
The International Journal of Prosthodontics · 2025
DOI: 10.11607/ijp.9179 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Prosthodontics, 2025. Verfasst von Martin Janda und 2 weiteren Autor:innen. Hauptthemen laut MEDLINE: Dental Bonding, Dental Porcelain, Ceramics, Dental Materials. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
Purpose
To investigate the shear bond strength of composite resin in five different ceramic repair systems for three different ceramic materials. Materials and Methods: A total of 225 monolithic zirconia (Zr), lithium disilicate (LDS), and cobalt-chromium (CoCr) specimens with feldspathic porcelain (FP) veneer were fabricated (N = 75 per material). The specimens underwent thermocycling and were randomly divided into five groups for the following intraoral repair systems (n = 15): (1) Clearfil Ceramic Primer Plus, Kuraray Noritake; (2) iBond Intraoral Repair Kit, Kulzer; (3) VOCO Cimara, VOCO Dental; (4) Ceramic Repair System Kit, Ivoclar Vivadent; and (5) Ultradent Porcelain Repair Kit, Ultradent Products. After surface conditioning, composite was applied using a cylindrical mold, and a second round of thermocycling was performed. Each specimen was then subjected to shear load until failure. Microshear bond strength was compared using one-way ANOVA (Tukey test, α < .05).
Results
The type of porcelain repair kit significantly affected the shear bond strength. For Zr, the repair systems from Kulzer and VOCO had significantly higher shear bond strength than the other systems (P < .001), without significant difference between Kulzer and VOCO. For the LDS and CoCr with FP, hydrofluoric acid had the highest shear bond strength (P < .001).
Conclusions
For zirconia, a 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) system should be used. The results also suggest that a cleaning bur may be beneficial. For glass-based ceramics and FP, etching with hydrofluoric acid remains the method of choice.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Zitieren
APA
Janda, M., Papia, E., & Larsson, C. (2025). Shear Bond Strength of Five Different Repair Systems to Three Different Ceramic Materials. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9179
Vancouver
Janda M, Papia E, Larsson C. Shear Bond Strength of Five Different Repair Systems to Three Different Ceramic Materials. The International Journal of Prosthodontics. 2025. doi:10.11607/ijp.9179
BibTeX
@article{Janda2025,
author = {Janda, Martin and Papia, Evaggelia and Larsson, Christel},
title = {Shear Bond Strength of Five Different Repair Systems to Three Different Ceramic Materials},
journal = {The International Journal of Prosthodontics},
year = {2025},
doi = {10.11607/ijp.9179}
}
EUVIMED