EUVIMEDEUVIMED entdecken
Crossref

Tensile bond strength of CAD‐CAM all ceramic crowns before and after thermomechanical aging

Chan-Ho Park, Kyung-Ho Ko iD, Yoon-Hyuk Huh, Chan-Jin Park iD, Lee-Ra Cho iD

Journal of Prosthodontics · 2025

DOI: 10.1111/jopr.13820 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2025. Verfasst von Chan-Ho Park und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics and Research Institute of Oral Science, College of Dentistry, Gangneung-Wonju National University, Gangneung, Republic o…. Hauptthemen laut MEDLINE: Crowns, Computer-Aided Design, Dental Bonding, Ceramics. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: 2022 Scientific Research Program Gangneung-Wonju National University Dental Hospital..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The purpose of this in vitro study was to compare the tensile bond strength (TBS) of resin nanoceramics (RNC), zirconia, and lithium disilicate (LS2) restorations cemented to titanium abutments before and after thermomechanical aging. Materials and Methods Twelve specimens per group were fabricated to determine the TBS between a titanium abutment and four types of crown materials (2 RNCs, LS2, and translucent zirconia crowns for the maxillary molar). After milling, the abutments and crowns were cemented with resin cement after air‐particle abrasion. In addition, thermomechanical aging (200,000 cycles, 50 N, 2 Hz) was applied to half of the specimens by using a mastication simulator. TBS was measured by using a universal testing machine. The interface between the crown and the cement was observed by using scanning electron microscopy (SEM). Two‐way ANOVA was performed to analyze the effects of crown materials and thermomechanical aging. Failure‐mode and interface analyses were also conducted.

Results

After thermomechanical aging, the TBS decreased in the LS2 specimens and increased in RNCs ( p < 0.001). The ratio of mixed failure and debonding with the hole‐sealing resin increased in the RNC group. SEM images showed the reduced gap between the crown and the resin cement after thermomechanical aging in the RNC group.

Conclusions

Differences in TBS were affected by the crown materials after thermomechanical aging. After thermomechanical aging, the RNC crowns showed increased TBS, whereas LS2 and zirconia crowns exhibited decreased or similar TBS.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CrownsComputer-Aided DesignDental BondingCeramicsTensile StrengthDental PorcelainZirconiumDental Stress AnalysisMaterials TestingDental AbutmentsTitaniumResin CementsHumansMicroscopy, Electron, ScanningDental Prosthesis DesignIn Vitro TechniquesDental Materials

Stichwörter der Autor:innen

resin cementresin nanoceramicstensile bond strengththermomechanical agingzirconia

Substanzen

Dental PorcelainZirconiumzirconium oxidelithia disilicateTitaniumResin CementsDental Materials

Autor:innen und Institutionen

  • Department of Prosthodontics and Research Institute of Oral Science, College of Dentistry, Gangneung-Wonju National University, Gangneung, Republic of Korea.

ORCID-Profile: Kyung-Ho Ko, Chan-Jin Park, Lee-Ra Cho

Förderung

  • 2022 Scientific Research Program Gangneung-Wonju National University Dental Hospital.

Zitieren

APA

Park, C. H., Ko, K. H., Huh, Y. H., Park, C. J., & Cho, L. R. (2025). Tensile bond strength of CAD‐CAM all ceramic crowns before and after thermomechanical aging. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13820

Vancouver

Park CH, Ko KH, Huh YH, Park CJ, Cho LR. Tensile bond strength of CAD‐CAM all ceramic crowns before and after thermomechanical aging. Journal of Prosthodontics. 2025. doi:10.1111/jopr.13820

BibTeX
@article{Park2025,
  author = {Park, Chan-Ho and Ko, Kyung-Ho and Huh, Yoon-Hyuk and Park, Chan-Jin and Cho, Lee-Ra},
  title = {Tensile bond strength of CAD‐CAM all ceramic crowns before and after thermomechanical aging},
  journal = {Journal of Prosthodontics},
  year = {2025},
  doi = {10.1111/jopr.13820}
}
Kostenlos starten →