EUVIMEDSkopri EUVIMED
Open access · CC BY-NC-ND 4.0

Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy

Michael Nikolopoulos iD, Konstantinos Dimitriadis iD, Stavros Yannikakis iD, Athanasios K Sfikas iD, Aristidis Galiatsatos iD, Pepie Tsolka iD

European Journal of Oral Sciences · 2025

DOI: 10.1111/eos.70031 ↗

At a glance

Journal article in European Journal of Oral Sciences, 2025. Written by Michael Nikolopoulos and 5 co-authors. Institution: Division of Dental Technology, Department of Biomedical Sciences, University of West Attica, Athens, Greece. Major MEDLINE topics: Dental Porcelain, Chromium Alloys, Dental Prosthesis Design, Dental Prosthesis, Implant-Supported. Cited 3 times so far (Crossref); 53 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study examines how porcelain firing cycles and fabrication methods impact the microstructure and the marginal and internal fit of implant‐cemented Co–Cr frameworks. Two fabrication processes for Co–Cr specimens were used: hard milling or soft milling. Each type of framework was then allocated to use either as‐fabricated or as porcelain‐fired. The microstructural analysis employed x‐ray diffraction (XRD) and scanning electron microscopy with energy‐dispersive x‐ray spectroscopy (SEM/EDX). A total of ten Co–Cr frameworks were fabricated for each method, and discrepancies in margin and internal fit were evaluated using X‐ray microtomography (micro‐CT) before and after the porcelain firing. Statistical analysis was performed using two‐way ANOVA and Tukey's multiple comparison tests ( α = 0.05). The findings indicated a combination of γ‐fcc and ε‐hcp cobalt‐based phases, with porcelain firing notably enhancing the ε‐Co content, particularly among soft milled specimens. Soft milled specimens exhibited a diffuse presence of pores, while hard milled specimens revealed a random distribution of small pores. The soft milled specimens exhibited a significant reduction in discrepancies after the application of firing cycles. Although not statistically significant, the hard milled specimens also showed a trend toward reduced discrepancies post‐firing. All subgroups maintained clinically acceptable marginal adaptation, with soft milled frameworks outperforming their hard milled counterparts in overall fit.

Subjects

MeSH terms (MEDLINE)

Dental PorcelainChromium AlloysDental Prosthesis DesignDental Prosthesis, Implant-SupportedCementationMicroscopy, Electron, ScanningX-Ray MicrotomographyX-Ray DiffractionMaterials TestingSpectrometry, X-Ray EmissionHumansDental Marginal AdaptationSurface Properties

Author keywords

CAD/CAMinternal fitmarginal fitmetal–ceramicssubtractive manufacturing

Substances

Dental PorcelainChromium Alloys

Authors and institutions

  • Division of Dental Technology, Department of Biomedical Sciences, University of West Attica, Athens, Greece.
  • Experimental Techniques Centre, Brunel University London, Uxbridge, UK.

ORCID profiles: Michael Nikolopoulos, Konstantinos Dimitriadis, Stavros Yannikakis, Athanasios K Sfikas, Aristidis Galiatsatos, Pepie Tsolka

Cite

APA

Nikolopoulos, M., Dimitriadis, K., Yannikakis, S., Sfikas, A. K., Galiatsatos, A., & Tsolka, P. (2025). Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70031

Vancouver

Nikolopoulos M, Dimitriadis K, Yannikakis S, Sfikas AK, Galiatsatos A, Tsolka P. Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy. European Journal of Oral Sciences. 2025. doi:10.1111/eos.70031

BibTeX
@article{Nikolopoulos2025,
  author = {Nikolopoulos, Michael and Dimitriadis, Konstantinos and Yannikakis, Stavros and Sfikas, Athanasios K and Galiatsatos, Aristidis and Tsolka, Pepie},
  title = {Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy},
  journal = {European Journal of Oral Sciences},
  year = {2025},
  doi = {10.1111/eos.70031}
}
Start for free →