Effect of sintering temperature on crystal structure, optical and thermal properties, and surface roughness and topography of nanolithium disilicate and zirconia-reinforced nanolithium silicate ceramics
Journal of Oral Science · 2025
DOI: 10.2334/josnusd.24-0318 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Oral Science, 2025. Verfasst von Supontep Teerakanok und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Conservative Dentistry, Faculty of Dentistry, Prince of Songkla University. Hauptthemen laut MEDLINE: Zirconium, Dental Porcelain, Ceramics, Silicates. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: Grant from Fundamental Fund 2023 by the National Science Research and Innovation Fund, Prince of Songkla University, Songkhla, Thailand.
Abstract (Originalsprache)
PURPOSE: This study evaluated the effects of sintering temperature on the crystal structure, optical and thermal properties, and surface roughness and topography of nanolithium disilicate ceramics (NLDS) and zirconia-reinforced nanolithium silicate ceramics (ZNLS). METHODS: One hundred and twenty specimens of each ceramics were prepared and divided into 4 groups on the basis of sintering temperature. The specimens were then subjected to X-ray diffraction (XRD), spectrophotometric analysis of optical properties, differential thermal analysis (DTA), thermal gravimetrical analysis (TGA), roughness analysis, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) spectrometry. The data were analyzed using one-way analysis of variance followed by Tukey's test (α = 0.05)Results: XRD confirmed the presence of lithium disilicate, lithium phosphate, lithium metasilicate, and quartz in NLDS and ZNLS specimens. TGA, DTA, and average roughness did not significantly differ between groups (P < 0.05). Among NLDS groups, NLDS4 had ∆E values that significantly differed from those of the other groups (P < 0.05). EDX showed that NLDS2 had the highest Si value (25.3 ± 0.1 wt%) followed by NLDS4 (24.8 ± 0.1 wt%). Among ZNLS groups, ZNLS2-4 had a clinically acceptable ∆E. EDX analysis showed no significant difference for any group. CONCLUSION: Sintering temperature did not affect the evaluated properties of NLDS. However, sintering ZNLS at different temperatures might affect the tested properties.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Conservative Dentistry, Faculty of Dentistry, Prince of Songkla University.
Förderung
- Grant from Fundamental Fund 2023 by the National Science Research and Innovation Fund
- Prince of Songkla University, Songkhla, Thailand
Zitieren
APA
Teerakanok, S., Ungurawasaporn, C., Kosago, P., & Kukiattrakoon, B. (2025). Effect of sintering temperature on crystal structure, optical and thermal properties, and surface roughness and topography of nanolithium disilicate and zirconia-reinforced nanolithium silicate ceramics. Journal of Oral Science. https://doi.org/10.2334/josnusd.24-0318
Vancouver
Teerakanok S, Ungurawasaporn C, Kosago P, Kukiattrakoon B. Effect of sintering temperature on crystal structure, optical and thermal properties, and surface roughness and topography of nanolithium disilicate and zirconia-reinforced nanolithium silicate ceramics. Journal of Oral Science. 2025. doi:10.2334/josnusd.24-0318
BibTeX
@article{Teerakanok2025,
author = {Teerakanok, Supontep and Ungurawasaporn, Chatcharwin and Kosago, Pitchaporn and Kukiattrakoon, Boonlert},
title = {Effect of sintering temperature on crystal structure, optical and thermal properties, and surface roughness and topography of nanolithium disilicate and zirconia-reinforced nanolithium silicate ceramics},
journal = {Journal of Oral Science},
year = {2025},
doi = {10.2334/josnusd.24-0318}
}
EUVIMED