EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy

Michael Nikolopoulos iD, Konstantinos Dimitriadis iD, Stavros Yannikakis iD, Athanasios K Sfikas iD, Aristidis Galiatsatos iD, Pepie Tsolka iD

European Journal of Oral Sciences · 2025

DOI: 10.1111/eos.70031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Oral Sciences, 2025. Verfasst von Michael Nikolopoulos und 5 weiteren Autor:innen. Beteiligte Einrichtung: Division of Dental Technology, Department of Biomedical Sciences, University of West Attica, Athens, Greece. Hauptthemen laut MEDLINE: Dental Porcelain, Chromium Alloys, Dental Prosthesis Design, Dental Prosthesis, Implant-Supported. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines how porcelain firing cycles and fabrication methods impact the microstructure and the marginal and internal fit of implant‐cemented Co–Cr frameworks. Two fabrication processes for Co–Cr specimens were used: hard milling or soft milling. Each type of framework was then allocated to use either as‐fabricated or as porcelain‐fired. The microstructural analysis employed x‐ray diffraction (XRD) and scanning electron microscopy with energy‐dispersive x‐ray spectroscopy (SEM/EDX). A total of ten Co–Cr frameworks were fabricated for each method, and discrepancies in margin and internal fit were evaluated using X‐ray microtomography (micro‐CT) before and after the porcelain firing. Statistical analysis was performed using two‐way ANOVA and Tukey's multiple comparison tests ( α = 0.05). The findings indicated a combination of γ‐fcc and ε‐hcp cobalt‐based phases, with porcelain firing notably enhancing the ε‐Co content, particularly among soft milled specimens. Soft milled specimens exhibited a diffuse presence of pores, while hard milled specimens revealed a random distribution of small pores. The soft milled specimens exhibited a significant reduction in discrepancies after the application of firing cycles. Although not statistically significant, the hard milled specimens also showed a trend toward reduced discrepancies post‐firing. All subgroups maintained clinically acceptable marginal adaptation, with soft milled frameworks outperforming their hard milled counterparts in overall fit.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental PorcelainChromium AlloysDental Prosthesis DesignDental Prosthesis, Implant-SupportedCementationMicroscopy, Electron, ScanningX-Ray MicrotomographyX-Ray DiffractionMaterials TestingSpectrometry, X-Ray EmissionHumansDental Marginal AdaptationSurface Properties

Stichwörter der Autor:innen

CAD/CAMinternal fitmarginal fitmetal–ceramicssubtractive manufacturing

Substanzen

Dental PorcelainChromium Alloys

Autor:innen und Institutionen

  • Division of Dental Technology, Department of Biomedical Sciences, University of West Attica, Athens, Greece.
  • Experimental Techniques Centre, Brunel University London, Uxbridge, UK.

ORCID-Profile: Michael Nikolopoulos, Konstantinos Dimitriadis, Stavros Yannikakis, Athanasios K Sfikas, Aristidis Galiatsatos, Pepie Tsolka

Zitieren

APA

Nikolopoulos, M., Dimitriadis, K., Yannikakis, S., Sfikas, A. K., Galiatsatos, A., & Tsolka, P. (2025). Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70031

Vancouver

Nikolopoulos M, Dimitriadis K, Yannikakis S, Sfikas AK, Galiatsatos A, Tsolka P. Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy. European Journal of Oral Sciences. 2025. doi:10.1111/eos.70031

BibTeX
@article{Nikolopoulos2025,
  author = {Nikolopoulos, Michael and Dimitriadis, Konstantinos and Yannikakis, Stavros and Sfikas, Athanasios K and Galiatsatos, Aristidis and Tsolka, Pepie},
  title = {Implant‐cemented Co–Cr frameworks produced by hard and soft milling: The impact of porcelain firing cycles on microstructure and fit accuracy},
  journal = {European Journal of Oral Sciences},
  year = {2025},
  doi = {10.1111/eos.70031}
}
Kostenlos starten →