Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication
ACS Applied Materials & Interfaces · 2023-05-10 · 15 (18) · 22506-22523
DOI: 10.1021/acsami.3c01307 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2023-04-26. Written by Mia Carrola and 4 co-authors. Institution: Department of Materials Science & Engineering, Texas A&M University, College Station, Texas 77843, United States. Cited 19 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY 4.0). Funded by: Air Force Research Laboratory, National Science Foundation.
Abstract (original language)
As fused filament fabrication (FFF) continues to gain popularity, many studies are turning to nanomaterials or optimization of printing parameters to improve the materials' properties; however, many overlook how materials formulation and additive manufacturing (AM) processes cooperatively engineer the evolution of properties across length scales. Evaluating the in-process evolution of the nanocomposite using AM will provide a fundamental understanding of the material's microstructure, which can be tailored to create unique characteristics in functionality and performance. In this study, the crystallinity behavior of polyetheretherketone (PEEK) was studied in the presence of carbon nanotubes (CNTs) as a nucleation aid for improved crystallization during FFF processing. Using various characterization techniques and molecular dynamics simulations, it was discovered that the crystallization behavior of extruded filaments is very different from that of 3D printed roads. Additionally, the printed material exhibited cold crystallization, and the CNT addition increased the crystallization of printed roads, which were amorphous without CNT addition. Tensile strength and modulus were increased by as much as 42 and 51%, respectively, due to higher crystallinity during printing. Detailed knowledge on the morphology of PEEK-CNT used in FFF allows gaining a fundamental understanding of the morphological evolution occurring during the AM process that in turn enables formulating materials for the AM process to achieve tailored mechanical and functional properties, such as crystallinity or conductivity.
Subjects
Author keywords
Authors and institutions
- Department of Materials Science & Engineering, Texas A&M University, College Station, Texas 77843, United States.
- Department of Mechanical Engineering, Texas A&M University, College Station, Texas 77843, United States.
- Materials & Manufacturing Directorate, Air Force Research Laboratory, WPAFB, Dayton, Ohio 45430, United States.
- High Performance Research Computing, Texas A&M University, MS 3361, College Station, Texas 77843-3361, United States.
- Department of Engineering Technology & Industrial Distribution, Texas A&M University, College Station, Texas 77843, United States.
ORCID profiles: Lisa M Pérez, Amir Asadi
Funding
- Air Force Research Laboratory
- National Science Foundation
Cite
APA
Carrola, M., Fallahi, H., Koerner, H., Pérez, L. M., & Asadi, A. (2023). Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication. ACS Applied Materials & Interfaces, 15(18), 22506-22523. https://doi.org/10.1021/acsami.3c01307
Vancouver
Carrola M, Fallahi H, Koerner H, Pérez LM, Asadi A. Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication. ACS Applied Materials & Interfaces. 2023;15(18):22506-22523. doi:10.1021/acsami.3c01307
BibTeX
@article{Carrola2023,
author = {Carrola, Mia and Fallahi, Hamed and Koerner, Hilmar and Pérez, Lisa M and Asadi, Amir},
title = {Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {18},
pages = {22506--22523},
doi = {10.1021/acsami.3c01307}
}
EUVIMED