EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Polyether Ether Ketone Melt Fluidity on Crystallization Behavior of Carbon Fiber Reinforced Polyether Ether Ketone Composites

Weifeng Liu, Xiaran Miao, Shiwen Tao, Ji Li, Jianzhong Ma, Jinjun Yang, Hui Li

Molecules · 25.05.2026 · 31 (11) · 1810

DOI: 10.3390/molecules31111810 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 25.05.2026. Verfasst von Weifeng Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-Dimension Materials, College of Materials Sci…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Materials-National Science and Technology Major Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The non-isothermal crystallization behavior of CF/PEEK composites during the cooling stage of processing significantly influences their final properties. However, the effect of PEEK melt fluidity on the crystallization kinetics and crystal morphology of CF/PEEK composites under varying cooling rates remains to be elucidated. This study employed differential scanning calorimetry (DSC) combined with crystallization kinetic models including Avrami and Mo equations to analyze the non-isothermal crystallization process, while wide-angle X-ray scattering (WAXS) characterized the crystal morphology. The results indicate that with increasing PEEK melt fluidity, the crystallinity of CF/PEEK composites rose from 22.2% to 25.93% at a cooling rate of 5 °C/min, accompanied by an enhanced crystallization rate. Mechanical testing revealed that the mechanical properties improved with increasing fluidity: the tensile and flexural strengths increased from 264.8 MPa and 413.3 MPa for CF/PEEK20 to 299.1 MPa and 476.5 MPa for CF/PEEK146, respectively. Furthermore, as the PEEK melt fluidity increased, the dominant factor governing crystallization behavior shifted from chain structural stability to molecular chain mobility, and ultimately to nucleation capability.

Schlagwörter

Stichwörter der Autor:innen

CF/PEEK compositescooling ratecrystal morphologymelt flow ratenon-isothermal crystallization kinetics

Autor:innen und Institutionen

  • State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-Dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
  • Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201204, China.
  • Avic Composite Co., Ltd., Beijing 101300, China.

Förderung

  • Advanced Materials-National Science and Technology Major Project

Zitieren

APA

Liu, W., Miao, X., Tao, S., Li, J., Ma, J., Yang, J., & Li, H. (2026). Effect of Polyether Ether Ketone Melt Fluidity on Crystallization Behavior of Carbon Fiber Reinforced Polyether Ether Ketone Composites. Molecules, 31(11), 1810. https://doi.org/10.3390/molecules31111810

Vancouver

Liu W, Miao X, Tao S, Li J, Ma J, Yang J, et al. Effect of Polyether Ether Ketone Melt Fluidity on Crystallization Behavior of Carbon Fiber Reinforced Polyether Ether Ketone Composites. Molecules. 2026;31(11):1810. doi:10.3390/molecules31111810

BibTeX
@article{Liu2026,
  author = {Liu, Weifeng and Miao, Xiaran and Tao, Shiwen and Li, Ji and Ma, Jianzhong and Yang, Jinjun and Li, Hui},
  title = {Effect of Polyether Ether Ketone Melt Fluidity on Crystallization Behavior of Carbon Fiber Reinforced Polyether Ether Ketone Composites},
  journal = {Molecules},
  year = {2026},
  volume = {31},
  number = {11},
  pages = {1810},
  doi = {10.3390/molecules31111810}
}
Kostenlos starten →