EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyether ether ketone (PEEK) and polyetherimide (PEI) for fused filament fabrication (FFF) in medical applications

Conor McCrickard, Adrian Boyd, Edward Archer, Faisal Manzoor, Jawad Ullah

The International Journal of Advanced Manufacturing Technology · 2025-10 · 140 (11-12) · 5737-5754

DOI: 10.1007/s00170-025-16589-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 01.10.2025. Verfasst von Conor McCrickard und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 135 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, high-performance polymers (HPP) have been exploited in the world of additive manufacturing (AM) as a result of improved techniques and the ability to process these materials which require higher processing temperatures. These materials present enhanced mechanical properties, chemical resistance, and thermal stability, increasing AM potentials beyond prototyping applications. Polyether ether ketone (PEEK) has been recognised for its mechanical properties due to its semi crystalline nature and established itself as a biomaterial, possessing biocompatibility and chemical resistance. Polyetherimide (PEI) is renowned for its thermal stability and has been utilised in high temperature-dependent applications. PEEK and PEI are one of the few miscible blends of HPPs, characterized through the presence of a single glass transition temperature. Both materials individually present properties which make them ideal for biomedical applications and through the blending of these materials the biomedical industry could benefit from the synergistic outcome. This review paper will look at PEEK, PEI, and their blends, focusing on the printing parameters, crystallinity and reinforcements. It will also take a look at some of the areas which PEEK and PEI are currently being used, including, implants, prosthetics, and Tissue Engineering.

Zitieren

APA

McCrickard, C., Boyd, A., Archer, E., Manzoor, F., & Ullah, J. (2025). Polyether ether ketone (PEEK) and polyetherimide (PEI) for fused filament fabrication (FFF) in medical applications. The International Journal of Advanced Manufacturing Technology, 140(11-12), 5737-5754. https://doi.org/10.1007/s00170-025-16589-2

Vancouver

McCrickard C, Boyd A, Archer E, Manzoor F, Ullah J. Polyether ether ketone (PEEK) and polyetherimide (PEI) for fused filament fabrication (FFF) in medical applications. The International Journal of Advanced Manufacturing Technology. 2025;140(11-12):5737-5754. doi:10.1007/s00170-025-16589-2

BibTeX
@article{McCrickard2025,
  author = {McCrickard, Conor and Boyd, Adrian and Archer, Edward and Manzoor, Faisal and Ullah, Jawad},
  title = {Polyether ether ketone (PEEK) and polyetherimide (PEI) for fused filament fabrication (FFF) in medical applications},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {140},
  number = {11-12},
  pages = {5737--5754},
  doi = {10.1007/s00170-025-16589-2}
}
Kostenlos starten →