EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Material Extrusion of PLA /Recycled Short Flax Fiber Biocomposites

Xiaotao Ye, Ehsan Estakhrianhaghighi, Marie Josee‐Dumont, Abdolhamid Akbarzadeh

SPE Polymers · 2025-10 · 6 (4)

DOI: 10.1002/pls2.70020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Polymers, online erschienen am 28.08.2025. Verfasst von Xiaotao Ye und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Canada Research Chairs, Centre Sève.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biocomposites are sustainable alternatives to conventional composites due to their biodegradability and renewability. This study investigates the mechanical properties of 3D‐printed flax fiber‐reinforced polylactic acid (PLA) composites with fiber weight fractions ranging from 0% to 5%, and examines the effects of a 2% (w/v) sodium hydroxide solution treatment on the composite properties. Adding untreated fiber reduces the mechanical properties of single filaments, while the addition of treated fiber improves tensile strength by 16% and tensile modulus by 14% with up to 5 wt.% flax fiber content in the biocomposite. The treated fibers significantly increase the stiffness of the 3D‐printed samples, with an 81% rise in Young's modulus. Compared to pure PLA samples, a 41% improvement is observed with 2.5 wt.% content of treated flax fiber. However, tensile strength decreases by 35% across all samples, with greater reductions following treatment. Compression tests show a 23% strength increase for samples with untreated fibers, but performance declines with chemical treatment. Microscopic images reveal voids that impact mechanical properties, while Fourier‐transform infrared spectroscopy confirms the effects of fiber surface modification. These findings highlight the trade‐offs between improving stiffness and reducing strength when pre‐treatment of flax fibers are used, and underscore the potential of flax fiber‐reinforced PLA biocomposites in sustainable additive manufacturing for environmentally‐benign a advanced material production.

Förderung

  • Canada Research Chairs
  • Centre Sève

Zitieren

APA

Ye, X., Estakhrianhaghighi, E., Josee‐Dumont, M., & Akbarzadeh, A. (2025). Material Extrusion of PLA /Recycled Short Flax Fiber Biocomposites. SPE Polymers, 6(4). https://doi.org/10.1002/pls2.70020

Vancouver

Ye X, Estakhrianhaghighi E, Josee‐Dumont M, Akbarzadeh A. Material Extrusion of PLA /Recycled Short Flax Fiber Biocomposites. SPE Polymers. 2025;6(4). doi:10.1002/pls2.70020

BibTeX
@article{Ye2025,
  author = {Ye, Xiaotao and Estakhrianhaghighi, Ehsan and Josee‐Dumont, Marie and Akbarzadeh, Abdolhamid},
  title = {Material Extrusion of PLA /Recycled Short Flax Fiber Biocomposites},
  journal = {SPE Polymers},
  year = {2025},
  volume = {6},
  number = {4},
  doi = {10.1002/pls2.70020}
}
Kostenlos starten →