EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion

David Hidalgo-Carvajal iD, Álvaro Hortal Muñoz, José J Garrido-González iD, Ruth Carrasco-Gallego iD, Victoria Alcázar Montero iD

Polymers · 04.09.2023 · 15 (17) · 3651

DOI: 10.3390/polym15173651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.09.2023. Verfasst von David Hidalgo-Carvajal und 4 weiteren Autor:innen. Beteiligte Einrichtung: Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Madrid, 28006 Madrid, Spain. Die Arbeit wurde bisher 67-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical University of Madrid, Comunidad de Madrid under Pluriannual Agreement with the Universidad Politécnica de Madrid (UPM), Campus UPM Circulares.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this work is to evaluate the reprocessing of PLA 3D printing waste from different origins, into filaments and films, and without the addition of any additive. Two types of waste were considered: a blend of different printing wastes (masks, visors, other components) of personal protective equipment coming from an association of Spanish coronamakers, and PLA waste from a single known commercial source. Both types of materials were subjected to repeated extrusion cycles and processed into films by compression molding. Samples were characterized after each cycle and their mechanical and viscosity properties evaluated. Diffusion-ordered NMR spectroscopy (DOSY) experiments were also carried out to estimate molecular weights. The results show a better performance for the PLA waste from the known origin, capable of withstanding up to three re-extrusion cycles per two for the waste blending, without significant degradation. Additionally, a model to address collection and mechanical recycling cycles under two different scenarios (full traceability and not full traceability) was proposed.

Schlagwörter

Stichwörter der Autor:innen

DOSYcircular economydistributed recyclingre-extrusion cyclesrecycled PLA filaments

Autor:innen und Institutionen

  • Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Madrid, 28006 Madrid, Spain.
  • Dirección de Compras Industrial y Cliente, Repsol, 28006 Madrid, Spain.
  • Facultad de C. Químicas, Universidad de Salamanca, 37008 Salamanca, Spain.
  • Grupo de Investigación Polímeros, Caracterización y Aplicaciones (POLCA), 28006 Madrid, Spain.

ORCID-Profile: David Hidalgo-Carvajal, José J Garrido-González, Ruth Carrasco-Gallego, Victoria Alcázar Montero

Förderung

  • Technical University of Madrid
  • Comunidad de Madrid under Pluriannual Agreement with the Universidad Politécnica de Madrid (UPM)
  • Campus UPM Circulares
  • EELISA European University Alliance

Zitieren

APA

Hidalgo-Carvajal, D., Muñoz, Á. H., Garrido-González, J. J., Carrasco-Gallego, R., & Alcázar Montero, V. (2023). Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion. Polymers, 15(17), 3651. https://doi.org/10.3390/polym15173651

Vancouver

Hidalgo-Carvajal D, Muñoz ÁH, Garrido-González JJ, Carrasco-Gallego R, Alcázar Montero V. Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion. Polymers. 2023;15(17):3651. doi:10.3390/polym15173651

BibTeX
@article{HidalgoCarvajal2023,
  author = {Hidalgo-Carvajal, David and Muñoz, Álvaro Hortal and Garrido-González, José J and Carrasco-Gallego, Ruth and Alcázar Montero, Victoria},
  title = {Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {17},
  pages = {3651},
  doi = {10.3390/polym15173651}
}
Kostenlos starten →