EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Feed-Controlled Filament Extrusion of High-Loading Micronized Soy Hull Fiber/PLA Biocomposites for Fused Deposition Modeling

Muneeb Tahir, Tri Vu, Abdel-Fattah M. Seyam

Fibers · 16.07.2026 · 14 (7) · 84

DOI: 10.3390/fib14070084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fibers, online erschienen am 16.07.2026. Verfasst von Muneeb Tahir und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the filament-making stage of a sequential single-screw process-development pathway for compatibilizer- and plasticizer-free soy hull fiber (SHF)/PLA biocomposites used in fused deposition modeling. Thirty-three filament-making trials were interpreted through an event-linked process chain, and 14 trials were evaluated using phase-resolved in-line diameter records and capability-style Cp/Cpk metrics. Filament-making converged on a single-mixing-zone screw, a 3.85 mm orifice/5.75 mm land die, 10 rev/min, and a 160/170/180/195 °C barrel profile for 10–30 wt.% SHF, whereas neat PLA required 180/185/200/205 °C. The strongest sustained benchmark was a 10SHF filament produced under converged settings, with a mean diameter of 1.7411 mm, a standard deviation of 0.0236 mm, 95.45% of readings within 1.70–1.80 mm, and only 0.013% above 1.89 mm. Feed replenishment, depletion, irregular pellets, recycled material, and fines-rich feed shifted the same nominal configuration among controlled and unstable states. The highest reliably spool-fed formulation was 30 wt.% SHF. The 35SHF filament remained nozzle-depositable from loose coils but fractured repeatedly during take-up and direct spool unwinding in 3D printing. Operational validation of all four converged filament formulations comprised 720 printed mechanical-test specimens over approximately 936 h. The reported conditions define platform-specific operating windows, but the process insights hold global relevance for pellet-based extrusion systems.

Zitieren

APA

Tahir, M., Vu, T., & Seyam, A. M. (2026). Feed-Controlled Filament Extrusion of High-Loading Micronized Soy Hull Fiber/PLA Biocomposites for Fused Deposition Modeling. Fibers, 14(7), 84. https://doi.org/10.3390/fib14070084

Vancouver

Tahir M, Vu T, Seyam AM. Feed-Controlled Filament Extrusion of High-Loading Micronized Soy Hull Fiber/PLA Biocomposites for Fused Deposition Modeling. Fibers. 2026;14(7):84. doi:10.3390/fib14070084

BibTeX
@article{Tahir2026,
  author = {Tahir, Muneeb and Vu, Tri and Seyam, Abdel-Fattah M.},
  title = {Feed-Controlled Filament Extrusion of High-Loading Micronized Soy Hull Fiber/PLA Biocomposites for Fused Deposition Modeling},
  journal = {Fibers},
  year = {2026},
  volume = {14},
  number = {7},
  pages = {84},
  doi = {10.3390/fib14070084}
}
Kostenlos starten →