Polymer‐Based Multiparameter Sensing Integrated Photonic Chip for Health Monitoring
Advanced Science · 2026
DOI: 10.1002/advs.76123 ↗At a glance
Journal article in Advanced Science, 2026. Written by Xiaolin Li and 11 co-authors. Institution: Tianjin Key Laboratory of Optoelectronic Detection Technology and Systems, School of Electronics and Information Engineering, Tiangong University, Ti…. Major MEDLINE topics: Biosensing Techniques, Polymers, Blood Glucose. 46 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, Key Project of Natural Science Foundation of Tianjin, Key Research and Development Program of Tianjin.
Abstract (original language)
Optical sensors are essential in medical diagnostics and detect variations in light intensity, phase, wavelength, polarization, or interference. However, conventional devices face limitations in multiplexing capability, surface functionalization, and integration. Here, we propose a monolithic integrated poly(dimethylsiloxane) (PDMS)/poly(methyl methacrylate) (PMMA) photonic chip that monolithically integrates two photonic waveguide Bragg grating (WBG) blood glucose sensors, a photonic WBG pressure sensor array, four photonic WBG temperature sensors, a photonic Mach–Zehnder modulator (MZM) electrocardiogram (ECG) sensor, and a photonic Mach–Zehnder interferometer (MZI) sweat glucose sensor, together with an on–chip arrayed waveguide grating (AWG) demodulation unit. The experimental results demonstrate that the WBG glucose sensor operates stably from 0 to 2.3 mg/mL, the pressure sensor from 0 to 12 kPa, and the temperature sensor from 35 to 41°C. The MZM ECG sensor achieves a half–wave voltage of 1.6 V, with performance comparable to that of commercial systems. The MZI sweat glucose sensor offers a detection range of 0–0.2 mg/mL, a sensitivity of approximately 9.3595 mW/(mg/mL), and high linearity. With a miniature footprint of approximately 1 cm × 0.5 cm, this work offers a robust on‐chip multiparameter sensing solution, paving the way for next–generation wearable continuous health monitoring.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- Tianjin Key Laboratory of Optoelectronic Detection Technology and Systems, School of Electronics and Information Engineering, Tiangong University, Tianjin, China.
- Shaoxing Keqiao Research Institute of Tiangong University, Shaoxing, China.
- Tianjin Key Laboratory of Intelligent Control of Electrical Equipment, School of Control Science and Engineering, Tiangong University, Tianjin, China.
- Engineering Teaching Practice Training Center, Tiangong University, Tianjin, China.
- School of Chemical Engineering and Technology, Tiangong University, Tianjin, China.
- School of Innovation and Entrepreneurship, Tiangong University, Tianjin, China.
ORCID profiles: Hongqiang Li
Funding
- National Natural Science Foundation of China
- Key Project of Natural Science Foundation of Tianjin
- Key Research and Development Program of Tianjin
- Open Project of Tianjin Key Laboratory of Optoelectronic Detection Technology and System
Cite
APA
Li, X., Li, H., Han, M., Liu, X., Ding, M., Niu, Z., Liu, D., Yang, L., Zhang, L., Hernández-Ramírez, F., Cao, L., & Li, E. (2026). Polymer‐Based Multiparameter Sensing Integrated Photonic Chip for Health Monitoring. Advanced Science. https://doi.org/10.1002/advs.76123
Vancouver
Li X, Li H, Han M, Liu X, Ding M, Niu Z, et al. Polymer‐Based Multiparameter Sensing Integrated Photonic Chip for Health Monitoring. Advanced Science. 2026. doi:10.1002/advs.76123
BibTeX
@article{Li2026,
author = {Li, Xiaolin and Li, Hongqiang and Han, Ming and Liu, Xin and Ding, Mingjun and Niu, Ziying and Liu, Dongyang and Yang, Liyuan and Zhang, Lizhen and Hernández-Ramírez, Francisco and Cao, Lu and Li, Enbang},
title = {Polymer‐Based Multiparameter Sensing Integrated Photonic Chip for Health Monitoring},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.76123}
}
EUVIMED