EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A case study on SSD to SAD linear accelerator calibration transition

Sharareh Koufigar, Eric Ford, Yulun He iD, Soren Olsen, Jessica M Fagerstrom iD

Journal of Applied Clinical Medical Physics · 2025

DOI: 10.1002/acm2.70298 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Clinical Medical Physics, 2025. Verfasst von Sharareh Koufigar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Radiation Oncology, University of Washington, Seattle, Washington, USA. Hauptthemen laut MEDLINE: Radiotherapy Planning, Computer-Assisted, Particle Accelerators, Quality Assurance, Health Care, Neoplasms. Die Arbeit nennt 6 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Modifying calibration conditions of linear accelerators is infrequent and potentially a high‐risk procedure. This study outlines a systematic approach used to transition a linear accelerator's calibration condition in an active clinical environment from source‐to‐surface (SSD) to source‐to‐axis (SAD), while maintaining treatment accuracy and avoiding interruption of clinical operations.

Methods

A satellite clinic within a university radiation oncology service operated an Elekta Versa HD linear accelerator with SSD calibration, while other system C‐arm accelerators used SAD. With a single installation of the treatment planning system used across all sites, it was decided to convert the machine to SAD calibration. Representative plans with diverse delivery techniques were comprehensively evaluated in advance. Over a single weekend, beams were recommissioned in the treatment planning system (TPS), and output was adjusted per AAPM's TG‐51 protocol. Monitor units (MUs) for on‐treatment patients were scaled manually in the oncology information system, MOSAIQ. Quality assurance (QA) checks, as well as independent peer‐reviewing of each field, were performed to ensure safety and quality for this high‐risk procedure. A retrospective failure modes and effects analysis (FMEA) was subsequently conducted. To evaluate the clinical relevance and broader impact of this work, a targeted survey was conducted via the Wayne State MedPhysUSA LISTSERV.

Results

As a result of the change in output calibration condition, field MU required scaling, ranging from 2.7% to 6.4%. Patient‐specific QA measurements demonstrated consistent gamma pass rates, and both solid‐water phantom and external audit results verified machine output accuracy within 2%. No patient treatments were interrupted during the process. The FMEA identified insufficient expertise and staffing as the highest‐risk failure mode. Survey results indicated that 80% of respondents had never personally performed a calibration transition with patients on treatment, and the majority of respondents characterized the procedure as extremely rare and of higher risk than standard TG‐51 annual QA.

Conclusions

The absolute output calibration condition was successfully transitioned from SSD to SAD without interruptions of patient treatments. Multiple verification steps were implemented to ensure quality and safety. This project contributed to improved standardization across multiple sites of practice.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Radiotherapy Planning, Computer-AssistedParticle AcceleratorsQuality Assurance, Health CareNeoplasmsRadiotherapy, Intensity-ModulatedPhantoms, ImagingCalibrationHumansRadiotherapy DosageRetrospective Studies

Stichwörter der Autor:innen

calibrationlinear acceleratorquality assurance

Autor:innen und Institutionen

  • Department of Radiation Oncology, University of Washington, Seattle, Washington, USA.
  • Division of Radiation Oncology, Fred Hutch Cancer Center, Poulsbo, Washington, USA.

ORCID-Profile: Yulun He, Jessica M Fagerstrom

Zitieren

APA

Koufigar, S., Ford, E., He, Y., Olsen, S., & Fagerstrom, J. M. (2025). A case study on SSD to SAD linear accelerator calibration transition. Journal of Applied Clinical Medical Physics. https://doi.org/10.1002/acm2.70298

Vancouver

Koufigar S, Ford E, He Y, Olsen S, Fagerstrom JM. A case study on SSD to SAD linear accelerator calibration transition. Journal of Applied Clinical Medical Physics. 2025. doi:10.1002/acm2.70298

BibTeX
@article{Koufigar2025,
  author = {Koufigar, Sharareh and Ford, Eric and He, Yulun and Olsen, Soren and Fagerstrom, Jessica M},
  title = {A case study on SSD to SAD linear accelerator calibration transition},
  journal = {Journal of Applied Clinical Medical Physics},
  year = {2025},
  doi = {10.1002/acm2.70298}
}
Kostenlos starten →