EUVIMED · CrossrefJournal
Construction Materials
ISSN 2673-7108 · MDPI AG
Latest articles
Source-Dependent Performance of Calcium Silicate-Based Co-Products Derived from Phosphoric Acid Production Processes
Hybrid Alkali-Activated Brick-Waste Binders: Synthesis Optimization, Mechanical Performance and Reaction Mechanisms
Effect of SiO2 Functionalization on the Reinforcement Efficiency of MWCNTs in Waste-Glass Cement Mortars
Thermal Resistance of GGBS and GGBS-PFA Geopolymer Concrete with Sodium Hydroxide and Laboratory-Synthesised Sodium Silicate
Modified Ternary Concrete for Hydraulic Applications: A Hybrid Bibliometric and Scoping Review of Fly Ash–Silica Fume Systems
Portland Cement Mortar Incorporating Coffee Husk Ash as a Supplementary Cementitious Material: Preliminary Insights on Mechanical and Environmental Performance
Persistence of Tensile Strain Hardening in Engineered Cementitious Composites: Ageing, Variability and Implications for Cracked-State Durability—A Critical Review
Experimental Investigation of the Flexural Behavior of Preloaded and Precracked Unbonded Post-Tensioned I-Section Concrete Beams Strengthened with CFRP
Very-Low-Density Porous Aggregate Produced by Organomineral Surface Dusting with Kyzylorda TPP Ash and Ground Rice Husk
Predicting the Ultimate Shear Capacity of Near-Surface-Mounted Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams Using Finite Element Analysis and Gene Expression Programming
Assessment of Cement-Decarbonization Pathways in South Africa Using Time-Dependent Scenario Modeling, Production-Stage Carbon Accounting and SBM-DEA
Role of Superabsorbent Polymers in Balancing Shrinkage Mitigation and Mechanical Performance of Slurry-Infiltrated Fiber Concrete (SIFCON)
Residual Flexural Behaviour of Reinforced Self-Compacting Concrete Beams After Fire Exposure: Effects of Fine-to-Coarse Aggregate Ratio, Heating Rate, and Boundary Restraint
Material-Level Fuzzy Logic Assessment of CEM III Mortars Under Raw-Material Variability: Effects of Fly Ash and Internal Sulfate Sources
Acid Resistance Behaviour of Seawater-Based Fly Ash–Slag Alkali-Activated Mortars Under Aggressive Exposure Conditions
Performance of Concrete with Mechanochemically Activated Rice Husk Ash-Based Organomineral Modifiers
Mechanical and Durability Properties of Concrete with Limestone Calcined Clay Cement: Assessing the Suitability of Tanzanian Kaolinite Clay
Insights into Early-Age Interfacial Bonding Improvement of Polymer-Modified Sulfoaluminate Cement Mortar: Roles of Polymer Film Formation and Hydration Regulation
Production, Characterization and Durability Assessment of Sintered Fly Ash Aggregate from Kyzylorda By-Product Hydraulic Ash for Lightweight Cementitious Composite
Evaluation of the Underwater Abrasion Resistance Behavior in Recycled Aggregate Concrete with Full Replacement of Natural Aggregates and Various Blast Furnace Slag Blaine Values
Performance of Sanitation Mortars Against Chloride Ion Migration in Contaminated Historical Masonry
A Comprehensive Time-Dependent H-Nuclear Magnetic Resonance Investigation of Water Phases in Graphene-Oxide-Induced Cementitious Composites
Experimental Study of Cotton Waste Fibre Effects on the Structural Performance of High-Strength Concrete Deep Beams with Light Shear Reinforcement
Toward Fully Recycled Asphalt Mixtures: Conditioning 100% RAP with Waste-Engine-Oil-Modified Binders
Utilization of Biomass Ash from Réunion Island as a Cementitious Binder
From Waste to Performance: Advancing Asphalt Recycling with Waste Oil Rejuvenators
Evaluating the Impact of Nano-Zeolite and Lime on Reconstituted Soil Resistance Using Explainable Machine Learning Framework
Shannon Entropy of Corrected AE Data for Damage Assessment in CFRP-Strengthened RC Beams: From Brittle Shear to Distributed Failure
Experimental Investigation of Hexagonal and Square Textile-Reinforced Cementitious Composite Elements and Their Connecting Systems
Influence of Curing Methods on Mechanical Properties of Concrete Beams Produced Through Additive Construction Methods
EUVIMED