Thermal Resistance of GGBS and GGBS-PFA Geopolymer Concrete with Sodium Hydroxide and Laboratory-Synthesised Sodium Silicate
Construction Materials · 13.11.2026 · 6 (6) · 104
DOI: 10.3390/constrmater6060104 ↗Kurz gefasst
Fachartikel in der Zeitschrift Construction Materials, online erschienen am 13.11.2026. Verfasst von Resmi Sankar Ravisankar und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The growing demand for low-carbon construction materials has heightened interest in geopolymer concrete (GPC) as an alternative to ordinary Portland cement (OPC) concrete; however, its performance at elevated temperatures remains an important consideration for structural applications. This study investigates the thermal resistance of GGBS-based and binary GGBS–PFA geopolymer concretes activated using sodium hydroxide and laboratory-synthesised sodium silicate, with OPC concrete included as a reference. Concrete specimens were exposed to temperatures of up to 800 °C, and their thermal performance was evaluated through visual observations, mass loss and residual compressive strength, supported by measurements of initial density, water absorption, sorptivity and porosity. The OPC concrete exhibited progressive strength deterioration, with a 60.58% reduction at 800 °C. In contrast, the geopolymer concretes showed improved strength retention, with the GGBS control and high-activator mixes recording reductions of 27.46% and 25.19%, respectively, at 800 °C. The binary PFA–GGBS concrete demonstrated the highest thermal resistance, exhibiting a 10.79% strength increase at 600 °C and retaining 73.75 ± 0.62 MPa at 800 °C, slightly above its initial strength. Overall, the results demonstrate the potential of GGBS-based geopolymer systems incorporating laboratory-synthesised sodium silicate for applications requiring improved resistance to elevated temperatures.
Zitieren
APA
Ravisankar, R. S., Adeleke, B. O., Kinuthia, J. M., & Oti, J. (2026). Thermal Resistance of GGBS and GGBS-PFA Geopolymer Concrete with Sodium Hydroxide and Laboratory-Synthesised Sodium Silicate. Construction Materials, 6(6), 104. https://doi.org/10.3390/constrmater6060104
Vancouver
Ravisankar RS, Adeleke BO, Kinuthia JM, Oti J. Thermal Resistance of GGBS and GGBS-PFA Geopolymer Concrete with Sodium Hydroxide and Laboratory-Synthesised Sodium Silicate. Construction Materials. 2026;6(6):104. doi:10.3390/constrmater6060104
BibTeX
@article{Ravisankar2026,
author = {Ravisankar, Resmi Sankar and Adeleke, Blessing O. and Kinuthia, John M. and Oti, Jonathan},
title = {Thermal Resistance of GGBS and GGBS-PFA Geopolymer Concrete with Sodium Hydroxide and Laboratory-Synthesised Sodium Silicate},
journal = {Construction Materials},
year = {2026},
volume = {6},
number = {6},
pages = {104},
doi = {10.3390/constrmater6060104}
}
EUVIMED