EUVIMEDEUVIMED entdecken
Crossref

Fracture toughness and total fracture work analysis of denture base resins for MSLA and for conventional lost-wax technique

P. Penchev

Journal of Achievements in Materials and Manufacturing Engineering · 01.02.2026

DOI: 10.5604/01.3001.0055.7973 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Achievements in Materials and Manufacturing Engineering, erschienen am 01.02.2026. Verfasst von P. Penchev.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of the study is to investigate the fracture toughness and total fracture work of some materials that can be used for complete denture fabrication using Masked stereolithography 3D printing technology and the conventional lost-wax technique.



Three specimen groups were fabricated. Two of them were 3D-printing using Masked SLA technology with two suitable, commonly used denture base resins. The third group was made of heat-curing acrylic resin by the conventional lost-wax technique. A crack was created on each specimen. The prepared objects were tested using a three-point flexural test, and the collected data were used to calculate fracture toughness and total fracture work.



The results reveal that the mean value of maximum stress intensity factor (Kmax) was reached by the heat-curing resin (1.65 MPa m1/2 0.18), followed by 3D-printed specimens with Kmax between 1.07 MPa m1/2 0.08 and 1.43 MPa m1/2 0.09. The heat-curing acrylic resin also has the highest capacity for load bearing before fracture, as the obtained mean values for total fracture work (Wf) were 2.8 kJ/m2 0.85, followed by the CAD/CAM resins by 1.7 kJ/m2 0.4 and 1.3 kJ/m2 0.2.



The limitations of the study concern the additional clinical factors. They should be observed to enable a more detailed evaluation of the mechanical properties of the observed materials. The denture base design should be planned according to the specific anatomical features of each edentulous patient. It could be the reason why some dentures break, and others don't, even if they are made of the same material and thickness.



Complete dentures still play an essential role in a clinician’s treatment plan. Knowledge of the mechanical properties of different denture base resins is very valuable for proper material selection and approach to complete denture fabrication. The current study reveals that the examined denture base resins for 3D printing have lower mechanical properties than the conventional heat-curing resins. The fracture toughness and total fracture work of the tested resins for 3D printing could result in more susceptible to fractures complete dentures than those made of the heat-curing resin.



Nowadays, there is a huge variety of materials and approaches for complete denture fabrication. Knowledge of denture base resin properties is very important for the proper selection of a material and/or technology for each clinical case.

Zitieren

APA

Penchev, P. (2026). Fracture toughness and total fracture work analysis of denture base resins for MSLA and for conventional lost-wax technique. Journal of Achievements in Materials and Manufacturing Engineering. https://doi.org/10.5604/01.3001.0055.7973

Vancouver

Penchev P. Fracture toughness and total fracture work analysis of denture base resins for MSLA and for conventional lost-wax technique. Journal of Achievements in Materials and Manufacturing Engineering. 2026. doi:10.5604/01.3001.0055.7973

BibTeX
@article{Penchev2026,
  author = {Penchev, P.},
  title = {Fracture toughness and total fracture work analysis of denture base resins for MSLA and for conventional lost-wax technique},
  journal = {Journal of Achievements in Materials and Manufacturing Engineering},
  year = {2026},
  doi = {10.5604/01.3001.0055.7973}
}
Kostenlos starten →