EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Polishing Techniques on the Mechanical Properties of Different Denture Base Materials

Rafal Kareem Rasheed, Najwah Yousuf Hameed, Mohammad Majduddin Sulaiman

Iraqi Journal of Medical and Health Sciences · 10.11.2026 · 3 (2) · 1-6

DOI: 10.51173/ijmhs.v3i2.113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Iraqi Journal of Medical and Health Sciences, online erschienen am 10.11.2026. Verfasst von Rafal Kareem Rasheed und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The dentistry field has seen tremendous progress in the introduction of digital technologies, especially three-dimensional (3D) printing, which has been vital to the progress of removable prosthodontics in terms of supporting artificial teeth. Objective of study: This study aims to assess the mechanical characteristics of various (denture PMMA and 3D printed resin) before and after the application of glazing. Materials and methods: In this study, 40 samples are prepared. The samples are split into two primary sets based on the type of denture base material. Acrylic resin samples are 20 pieces of heat-polymerized acrylic resin and 20 pieces of denture base material fabricated using 3D printing technology.

Results

The amount of glaze material used is split into equal subgroups (n=10) in each of the main groups. Once sample preparation is completed, all samples are measured only in surface roughness to evaluate the effect that direct glaze has on surface roughness of various denture base materials. Referring to surface roughness, the two experimental groups indicate that the groups of glaze material have a maximum mean Ra value compared to the groups without glaze of low mean Ra.

Conclusions

Both the surface treatment and the type of material have significant effect on surface roughness (Ra). The statistical analysis results show that the surface roughness can be decreased significantly in all groups after glazing.

Zitieren

APA

Rasheed, R. K., Hameed, N. Y., & Sulaiman, M. M. (2026). Effect of Polishing Techniques on the Mechanical Properties of Different Denture Base Materials. Iraqi Journal of Medical and Health Sciences, 3(2), 1-6. https://doi.org/10.51173/ijmhs.v3i2.113

Vancouver

Rasheed RK, Hameed NY, Sulaiman MM. Effect of Polishing Techniques on the Mechanical Properties of Different Denture Base Materials. Iraqi Journal of Medical and Health Sciences. 2026;3(2):1-6. doi:10.51173/ijmhs.v3i2.113

BibTeX
@article{Rasheed2026,
  author = {Rasheed, Rafal Kareem and Hameed, Najwah Yousuf and Sulaiman, Mohammad Majduddin},
  title = {Effect of Polishing Techniques on the Mechanical Properties of Different Denture Base Materials},
  journal = {Iraqi Journal of Medical and Health Sciences},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {1--6},
  doi = {10.51173/ijmhs.v3i2.113}
}
Kostenlos starten →