Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies
The Journal of Advanced Prosthodontics · 2022 · 14 (6) · 360
DOI: 10.4047/jap.2022.14.6.360 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Advanced Prosthodontics, 2022. Verfasst von Omar Alageel und 5 weiteren Autor:innen. Beteiligte Einrichtung: Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Research & Innovation, Ministry of Education in Saudi Arabia.
Abstract (Originalsprache)
PURPOSE: This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS: Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS: The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION: According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia.
- Engineer Abdullah Bugshan Research Chair for Dental and Oral Rehabilitation, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
- Dental University Hospital, King Saud University Medical City, Riyadh, Saudi Arabia.
ORCID-Profile: Omar Alageel, Omar Alsadon, Haitham Almansour, Abdullah Alshehri, Fares Alhabbad, Majed Alsarani
Förderung
- Research & Innovation, Ministry of Education in Saudi Arabia
Zitieren
APA
Alageel, O., Alsadon, O., Almansour, H., Alshehri, A., Alhabbad, F., & Alsarani, M. (2022). Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies. The Journal of Advanced Prosthodontics, 14(6), 360. https://doi.org/10.4047/jap.2022.14.6.360
Vancouver
Alageel O, Alsadon O, Almansour H, Alshehri A, Alhabbad F, Alsarani M. Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies. The Journal of Advanced Prosthodontics. 2022;14(6):360. doi:10.4047/jap.2022.14.6.360
BibTeX
@article{Alageel2022,
author = {Alageel, Omar and Alsadon, Omar and Almansour, Haitham and Alshehri, Abdullah and Alhabbad, Fares and Alsarani, Majed},
title = {Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies},
journal = {The Journal of Advanced Prosthodontics},
year = {2022},
volume = {14},
number = {6},
pages = {360},
doi = {10.4047/jap.2022.14.6.360}
}
EUVIMED