EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Trueness, Flexural Strength, and Surface Properties of Various Three-Dimensional (3D) Printed Interim Restorative Materials after Accelerated Aging

Omar Alageel, Saleh Alhijji iD, Omar Alsadon iD, Majed Alsarani, Abdurabu Abdullah Gomawi, Abdulaziz Alhotan iD

Polymers · 14.07.2023 · 15 (14) · 3040

DOI: 10.3390/polym15143040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.07.2023. Verfasst von Omar Alageel und 5 weiteren Autor:innen. Beteiligte Einrichtung: Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh 12372, Saudi Arabia. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship for Deputyship for Research and Innovation, "Ministry of Education" in Saudi Arabia, Deanship for Deputyship for Research and Innovation, “Ministry of Education” in Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Various 3D printing systems for interim fixed dental restorations are commercially available. This study aimed to evaluate the physical and mechanical properties of 3D printed resins used for interim restorations fabricated using various 3D printing systems and printing angulations after accelerated aging. Three different interim restorative materials were provided and printed using their specific 3D printing systems (A: NextDent; B: Asiga; C: Nova3D), and the testing specimens from each system were printed at two building angles: (1) 0° and (2) 90°. The six groups were A1, A2, B1, B2, C1, and C2, with sixteen specimens per group. Half of the specimens in each group (N = 8) were subjected to accelerated aging, including simulated brushing and thermocycling. Three-point bending, surface roughness, and Vickers microhardness tests were performed. Two-way ANOVA and Fisher’s multiple tests were used for statistical analyses. The most accurate systems were found in groups C1 and C2 for length, A1 and B1 for width, and A1 and C1 for height. The specimen trueness only changed after aging for groups B1, B2, and C1. The flexural strength of the A2 group (151 ± 7 MPa) before aging was higher than that of the other groups, and the strength decreased after aging only for groups A1 and A2. The flexural strength, microhardness, and surface roughness of the 3D printed interim resins after aging varied depending on the material, system used, and printing angle.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingaginginterim restorationsrestorative dentistrytemporary restorations

Autor:innen und Institutionen

  • Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh 12372, Saudi Arabia.
  • Dental University Hospital, King Saud University Medical City, Riyadh 11461, Saudi Arabia.

ORCID-Profile: Saleh Alhijji, Omar Alsadon, Abdulaziz Alhotan

Förderung

  • Deanship for Deputyship for Research and Innovation, "Ministry of Education" in Saudi Arabia
  • Deanship for Deputyship for Research and Innovation, “Ministry of Education” in Saudi Arabia

Zitieren

APA

Alageel, O., Alhijji, S., Alsadon, O., Alsarani, M., Gomawi, A. A., & Alhotan, A. (2023). Trueness, Flexural Strength, and Surface Properties of Various Three-Dimensional (3D) Printed Interim Restorative Materials after Accelerated Aging. Polymers, 15(14), 3040. https://doi.org/10.3390/polym15143040

Vancouver

Alageel O, Alhijji S, Alsadon O, Alsarani M, Gomawi AA, Alhotan A. Trueness, Flexural Strength, and Surface Properties of Various Three-Dimensional (3D) Printed Interim Restorative Materials after Accelerated Aging. Polymers. 2023;15(14):3040. doi:10.3390/polym15143040

BibTeX
@article{Alageel2023,
  author = {Alageel, Omar and Alhijji, Saleh and Alsadon, Omar and Alsarani, Majed and Gomawi, Abdurabu Abdullah and Alhotan, Abdulaziz},
  title = {Trueness, Flexural Strength, and Surface Properties of Various Three-Dimensional (3D) Printed Interim Restorative Materials after Accelerated Aging},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3040},
  doi = {10.3390/polym15143040}
}
Kostenlos starten →