EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Analysis of High Pass Filter Using DGS

Surabhi Patankar

International Journal of Electrical and Electronics Research · 2015

DOI: 10.37391/030203 ↗

At a glance

Journal article in International Journal of Electrical and Electronics Research, 2015. Written by Surabhi Patankar. 13 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The performance of a High Pass Filter (HPF) with and without Defected Ground Structure (DGS) was analyzed. The defected ground structure is circular etched shapes in ground plane. Comparison of the response of filter with and without DGS was done separately. Parameters of the proposed configuration were calculated at the centre frequency of 1.5 GHz and with dielectric constant of 4.4, loss tangent of 0.02 and substrate height of 1.6mm. Results were simulated using computer simulation technology software (CST). The undesired sidebands and fluctuations of response were reduced by using defected ground structure (DGS).

Cite

APA

Patankar, S. (2015). Analysis of High Pass Filter Using DGS. International Journal of Electrical and Electronics Research. https://doi.org/10.37391/030203

Vancouver

Patankar S. Analysis of High Pass Filter Using DGS. International Journal of Electrical and Electronics Research. 2015. doi:10.37391/030203

BibTeX
@article{Patankar2015,
  author = {Patankar, Surabhi},
  title = {Analysis of High Pass Filter Using DGS},
  journal = {International Journal of Electrical and Electronics Research},
  year = {2015},
  doi = {10.37391/030203}
}
Start for free →