Preparation and characterization of dental nanocomposite resin for 3D-printed dental crown and bridge restorations
International Journal of Bioprinting · 21.01.2025 · 11 (2) · 545
DOI: 10.36922/ijb.6400 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 21.01.2025. Verfasst von Junlong Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).
Abstract (Originalsprache)
Digital light processing (DLP) 3D printing technology exhibits remarkable potential in dental manufacturing due to its exceptional precision, customization capabilities, and rapid prototyping abilities. Compared to crown and bridge restorations produced through milling and sintering, resin restorations fabricated using DLP printing technology offer higher accuracy and more efficient and economical processing methods. However, the clinical application of DLP-printed tooth crowns and bridge prostheses is limited by their poor mechanical properties and biocompatibility. In this study, a light-curing resin matrix was formulated using urethane dimethacrylate, poly(propylene glycol) dimethacrylate, and a novel photoinitiator 2,4,6-trimethylbenzoyl bis(p-tolyl) phosphine oxide. Silane-modified nano-silica (SiO2) was used as a reinforcing filler to achieve different solid contents in the resin matrix. Four groups of DLP-printed dental nanocomposite resins (DNRs) were prepared with varying solid contents: 16, 19, 22, and 25 wt%. Subsequently, comprehensive evaluations were conducted on the rheological properties, flexural strength, compressive strength, hardness, water absorption capacity, solubility, double bond conversion efficiency, and light transmittance of DNRs with different solid contents. The esthetic properties and biocompatibility of DNRs were further assessed using gingival fibroblasts. The results demonstrated that incorporating 19 wt% SiO2 nanoparticles into the resin matrix significantly enhanced both physical– mechanical properties and biocompatibility of DNRs. In conclusion, the DLP-printed dental nanocomposite with a solid content of 19 wt% exhibited excellent physical– mechanical properties and biocompatibility, suggesting its potential for application in crown and bridge restorations for DLP-printed teeth.
Zitieren
APA
Liu, J., Wang, W., Zheng, Y., Zhao, Z., & Xiong, Y. (2025). Preparation and characterization of dental nanocomposite resin for 3D-printed dental crown and bridge restorations. International Journal of Bioprinting, 11(2), 545. https://doi.org/10.36922/ijb.6400
Vancouver
Liu J, Wang W, Zheng Y, Zhao Z, Xiong Y. Preparation and characterization of dental nanocomposite resin for 3D-printed dental crown and bridge restorations. International Journal of Bioprinting. 2025;11(2):545. doi:10.36922/ijb.6400
BibTeX
@article{Liu2025,
author = {Liu, Junlong and Wang, Weiqu and Zheng, Yuanli and Zhao, Zhe and Xiong, Yaoyang},
title = {Preparation and characterization of dental nanocomposite resin for 3D-printed dental crown and bridge restorations},
journal = {International Journal of Bioprinting},
year = {2025},
volume = {11},
number = {2},
pages = {545},
doi = {10.36922/ijb.6400}
}
EUVIMED