EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Surface Preparation Methods on the Color Stability of 3D-Printed Dental Restorations

Zbigniew Raszewski, Katarzyna Chojnacka, Marcin Mikulewicz

Journal of Functional Biomaterials · 05.05.2023 · 14 (5) · 257

DOI: 10.3390/jfb14050257 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 05.05.2023. Verfasst von Zbigniew Raszewski und 2 weiteren Autor:innen. Beteiligte Einrichtung: SpofaDental, Markova 238, 506-01 Jicin, Czech Republic. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Color stability is a crucial performance parameter for dental restorations, and limited research exists on how surface preparation methods affect it. The purpose of this study was to test the color stability of three resins intended for 3D printing, which can be used to make dentures or crowns in A2 and A3 colors. Materials and Methods: Samples were prepared in the form of incisors; the first group was not subjected to any treatment after curing and washing with alcohol, the second was covered with light-curing varnish, and the third was polished in a standard way. Then, the samples were placed in solutions of coffee, red wine, and distilled water and stored in the laboratory. After 14, 30, and 60 days, color changes were measured (presented as Delta E) compared to material stored in the dark.

Results

The greatest changes were observed for samples that were not polished, then were placed in red wine dilutions (ΔE = 18.19 ± 0.16). Regarding the samples covered with varnish, during storage, some parts detached, and the dyes penetrated inside.

Conclusions

3D-printed material should be polished as thoroughly as possible to limit the adhesion of dyes from food to their surface. Applying varnish may be a temporary solution.

Schlagwörter

Stichwörter der Autor:innen

3D printingcoffeecolor stabilitydental restorationspolishingred winesurface preparationvarnishing

Autor:innen und Institutionen

  • SpofaDental, Markova 238, 506-01 Jicin, Czech Republic.
  • Department of Advanced Material Technologies, Faculty of Chemistry, Wroclaw University of Science and Technology, Smoluchowskiego 25, 50-372 Wroclaw, Poland.
  • Department of Dentofacial Orthopaedics and Orthodontics, Division of Facial Abnormalities, Wroclaw Medical University, Krakowska 26, 50-425 Wroclaw, Poland.

Zitieren

APA

Raszewski, Z., Chojnacka, K., & Mikulewicz, M. (2023). Effects of Surface Preparation Methods on the Color Stability of 3D-Printed Dental Restorations. Journal of Functional Biomaterials, 14(5), 257. https://doi.org/10.3390/jfb14050257

Vancouver

Raszewski Z, Chojnacka K, Mikulewicz M. Effects of Surface Preparation Methods on the Color Stability of 3D-Printed Dental Restorations. Journal of Functional Biomaterials. 2023;14(5):257. doi:10.3390/jfb14050257

BibTeX
@article{Raszewski2023,
  author = {Raszewski, Zbigniew and Chojnacka, Katarzyna and Mikulewicz, Marcin},
  title = {Effects of Surface Preparation Methods on the Color Stability of 3D-Printed Dental Restorations},
  journal = {Journal of Functional Biomaterials},
  year = {2023},
  volume = {14},
  number = {5},
  pages = {257},
  doi = {10.3390/jfb14050257}
}
Kostenlos starten →