Influence of high filler content of zirconia and ceramic on the properties of 3D-printed resin for dental restorations
Journal of Prosthodontic Research · 2026
DOI: 10.2186/jpr.jpr_d_25_00277 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2026. Verfasst von Jung-Hwa Lim und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Yonsei University College of Dentistry, Seoul, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 58 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: To evaluate the mechanical and physical properties of three-dimensional (3D)-printed resins containing >50 wt% inorganic fillers, and compare them with a computer-aided design and computer-aided manufacturing (CAD-CAM) nano-hybrid ceramic resin block and a conventional resin-based 3D-printed material. METHODS: 3D-printed resins, including an unfilled resin (RP), a high-filler resin containing >50 wt% inorganic fillers (RCP), and a zirconia-containing high-filler resin (>60 wt% inorganic fillers; RZP), as well as a CAD-CAM nano-hybrid ceramic resin block (RCM), were investigated. Biaxial flexural strength, Weibull reliability, surface hardness, water sorption, and solubility were evaluated. Data were analyzed using one-way analysis of variance (ANOVA), followed by Bonferroni post hoc tests (α = 0.05). Weibull probability analysis with 95% confidence intervals was used to determine the characteristic strength and reliability for each material group. RESULTS: The RZP exhibited the highest flexural strength, followed by RCP and RCM, all outperforming the RP. RZP and RCP demonstrated superior absolute strength but greater variability, while RCM demonstrated higher reliability. Vickers hardness was highest in RCM, though both high-filler resins exceeded RP. RZP showed the greatest water sorption, and RCM showed the lowest solubility. Surface and elemental analyses supported differences in fracture behavior and filler composition. CONCLUSIONS: High-filler 3D-printed resins show mechanical performance comparable to that of CAD-CAM nano-hybrid ceramic resin blocks and are promising materials for restorations requiring enhanced strength and durability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, Yonsei University College of Dentistry, Seoul, Republic of Korea.
- Section of Restorative Dentistry, UCLA School of Dentistry, Los Angeles, USA.
- Department of Industrial Dentistry, Yonsei University College of Dentistry, Seoul, Republic of Korea.
- Department of Prosthodontics, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul, Republic of Korea.
- Department of Biologic and Materials Sciences & Prosthodontics, University of Michigan School of Dentistry, Ann Arbor, USA.
Zitieren
APA
Lim, J. H., Cho, S. K., Lee, S. Y., Kim, R., Oh, W. S., & Kim, J. E. (2026). Influence of high filler content of zirconia and ceramic on the properties of 3D-printed resin for dental restorations. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_25_00277
Vancouver
Lim JH, Cho SK, Lee SY, Kim R, Oh WS, Kim JE. Influence of high filler content of zirconia and ceramic on the properties of 3D-printed resin for dental restorations. Journal of Prosthodontic Research. 2026. doi:10.2186/jpr.jpr_d_25_00277
BibTeX
@article{Lim2026,
author = {Lim, Jung-Hwa and Cho, Seong-Keun and Lee, Sang-Yub and Kim, Reuben and Oh, Won-Suck and Kim, Jong-Eun},
title = {Influence of high filler content of zirconia and ceramic on the properties of 3D-printed resin for dental restorations},
journal = {Journal of Prosthodontic Research},
year = {2026},
doi = {10.2186/jpr.jpr_d_25_00277}
}
EUVIMED