EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluating a Novel 3D-Printed Resin for Dental Restorations: Fracture Resistance of Restorations Fabricated by Digital Press Stereolithography

Cristian Abad-Coronel iD, Cinthya Freire Bonilla, Sebastián Vidal iD, Fabián Rosero, Carolina Encalada Abad iD, Nancy Mena Córdova, César A Paltán iD, Jorge I Fajardo iD, Paulina Aliaga

Polymers · 27.08.2025 · 17 (17) · 2322

DOI: 10.3390/polym17172322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.08.2025. Verfasst von Cristian Abad-Coronel und 8 weiteren Autor:innen. Beteiligte Einrichtung: CAD/CAM and Digital Dentistry Research Group, Faculty of Dentistry, Universidad de Cuenca, Cuenca 010107, Ecuador. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An in vitro study evaluated the fracture resistance of four CAD/CAM restorative materials: lithium disilicate ceramic (IPS e.max CAD, EM), hybrid ceramic (Vita Enamic, VE), a polymer-based composite (Cerasmart, CS), and a novel 3D-printed resin (Ceramic Crown, CC) fabricated using digital press stereolithography (DPS) technology. Standardized full-coverage crowns were designed and manufactured for each material. All specimens underwent thermocycling and fracture testing using a universal testing machine. EM exhibited the highest fracture resistance (mean: 440.49 N), while VE showed the lowest (173.82 N). CS (265.49 N) and CC (306.76 N) presented intermediate values without statistically significant differences between them. Stereomicroscopic analysis revealed differences in fracture patterns, with IPS e.max CAD showing smooth, brittle fractures, while hybrid and polymer-based materials exhibited tortuous fracture surfaces. These results suggest that DPS technology achieves mechanical performance for Ceramic Crown comparable to that of milled polymer-based composites, while offering production advantages in terms of time efficiency. As one of the first studies to evaluate Ceramic Crown and DPS technology, these findings provide initial insights into their mechanical behavior. However, further studies are required to validate their clinical performance before widespread use can be recommended.

Schlagwörter

Stichwörter der Autor:innen

3D printingCAD/CAM materialsbiomechanical testingdental polymersdigital press stereolithography (DPS)indirect restoration

Autor:innen und Institutionen

  • CAD/CAM and Digital Dentistry Research Group, Faculty of Dentistry, Universidad de Cuenca, Cuenca 010107, Ecuador.
  • Department of Prosthodontics, Faculty of Dentistry, Universidad San Francisco de Quito, Quito 170901, Ecuador.
  • Private Practice, Quito 170517, Ecuador.
  • Mechanical Enginnering New Materials and Transformation Processes Research Group (GiMaT), Universidad Politécnica Salesiana, Cuenca 170517, Ecuador.

ORCID-Profile: Cristian Abad-Coronel, Sebastián Vidal, Carolina Encalada Abad, César A Paltán, Jorge I Fajardo

Zitieren

APA

Abad-Coronel, C., Freire Bonilla, C., Vidal, S., Rosero, F., Encalada Abad, C., Mena Córdova, N., Paltán, C. A., Fajardo, J. I., & Aliaga, P. (2025). Evaluating a Novel 3D-Printed Resin for Dental Restorations: Fracture Resistance of Restorations Fabricated by Digital Press Stereolithography. Polymers, 17(17), 2322. https://doi.org/10.3390/polym17172322

Vancouver

Abad-Coronel C, Freire Bonilla C, Vidal S, Rosero F, Encalada Abad C, Mena Córdova N, et al. Evaluating a Novel 3D-Printed Resin for Dental Restorations: Fracture Resistance of Restorations Fabricated by Digital Press Stereolithography. Polymers. 2025;17(17):2322. doi:10.3390/polym17172322

BibTeX
@article{AbadCoronel2025,
  author = {Abad-Coronel, Cristian and Freire Bonilla, Cinthya and Vidal, Sebastián and Rosero, Fabián and Encalada Abad, Carolina and Mena Córdova, Nancy and Paltán, César A and Fajardo, Jorge I and Aliaga, Paulina},
  title = {Evaluating a Novel 3D-Printed Resin for Dental Restorations: Fracture Resistance of Restorations Fabricated by Digital Press Stereolithography},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {17},
  pages = {2322},
  doi = {10.3390/polym17172322}
}
Kostenlos starten →