EUVIMEDEUVIMED entdecken
Open Access

Efficient Powder Removal and Micro-Nano Structural Formation in 3D-Printed Porous Titanium Implants for Enhanced Osteogenesis

Jincheng Tang iD, Sijing Li, Yonglun Liu iD, Cheng Liu, Guoxian Pei, Lin Wang, Ming Yan, Dewei Zhao

Biomaterials Research · 01.01.2026 · 30

DOI: 10.34133/bmr.0434 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomaterials Research, online erschienen am 05.11.2026. Verfasst von Jincheng Tang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics, Affiliated Zhongshan Hospital of Dalian University, Dalian 116001, China. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Shenzhen Medical Research Fund, Batten Institute for Innovation and Entrepreneurship, Darden School of Business, University of Virginia, Guangdong S&T programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Powder bed fusion-laser beam enables the fabrication of patient-specific medical implants; however, the complete removal of residual powders from complex porous architectures remains a major challenge, compromising biological performance. In this study, a high-voltage (90 V) anodic oxidation (AO) surface polishing strategy was developed to achieve efficient powder removal and surface optimization of triply periodic minimal surface gyroid porous titanium implants. AO treatment markedly reduced surface roughness, slightly enlarged the pore size by approximately 30 to 50 μm while maintaining an overall pore size of 300 to 600 μm, and generated a honeycomb-like microstructure favorable for cell adhesion and bone ingrowth. X-ray photoelectron spectroscopy analysis confirmed the formation of a stable and compact TiO 2 film, which enhanced hydrophilicity and negative surface charge, thereby promoting calcium phosphate deposition and osteogenic mineralization. Both in vitro and in vivo evaluations demonstrated significantly improved early-stage cell adhesion, long-term mineralization, and bone regeneration after AO treatment compared with untreated controls. Polished CP-Ti-AU-45 specimens achieved a new bone mineral density of 0.19 g/cm 3 and a bone volume fraction of 33.8%. The molecular mechanism may involve the activation of extracellular matrix–receptor interactions, adhesion plaques, and PI3K–Akt signaling pathways while inhibiting ferroptosis-related signaling pathways, leading to a significant increase in the messenger RNA levels of Runx2 and Mef2c. The AO polishing strategy preserved the mechanical integrity of porous metals while integrating efficient powder removal with surface functionalization, thereby substantially enhancing the osseointegration potential of porous metallic implants.

Autor:innen und Institutionen

  • Department of Orthopedics, Affiliated Zhongshan Hospital of Dalian University, Dalian 116001, China.
  • School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
  • Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China.
  • School of Medicine, Southern University of Science and Technology, Shenzhen 518055, China.
  • 3R Additive Technology (Shenzhen) Co., Ltd., Shenzhen 518055, China.
  • Jiaxing Research Institute, Southern University of Science and Technology, Jiaxing 314031, China.

ORCID-Profile: Jincheng Tang, Yonglun Liu

Förderung

  • Shenzhen Medical Research Fund
  • Batten Institute for Innovation and Entrepreneurship, Darden School of Business, University of Virginia
  • Guangdong S&T programme
  • Guangdong Talent Project
  • National Natural Science Foundation of China
  • Shenzhen Science and Technology Innovation Commission

Zitieren

APA

Tang, J., Li, S., Liu, Y., Liu, C., Pei, G., Wang, L., Yan, M., & Zhao, D. (2026). Efficient Powder Removal and Micro-Nano Structural Formation in 3D-Printed Porous Titanium Implants for Enhanced Osteogenesis. Biomaterials Research, 30. https://doi.org/10.34133/bmr.0434

Vancouver

Tang J, Li S, Liu Y, Liu C, Pei G, Wang L, et al. Efficient Powder Removal and Micro-Nano Structural Formation in 3D-Printed Porous Titanium Implants for Enhanced Osteogenesis. Biomaterials Research. 2026;30. doi:10.34133/bmr.0434

BibTeX
@article{Tang2026,
  author = {Tang, Jincheng and Li, Sijing and Liu, Yonglun and Liu, Cheng and Pei, Guoxian and Wang, Lin and Yan, Ming and Zhao, Dewei},
  title = {Efficient Powder Removal and Micro-Nano Structural Formation in 3D-Printed Porous Titanium Implants for Enhanced Osteogenesis},
  journal = {Biomaterials Research},
  year = {2026},
  volume = {30},
  doi = {10.34133/bmr.0434}
}
Kostenlos starten →