Efficient PFAS Removal Using Reusable and Non‐Toxic 3D Printed Porous Trianglamine Hydrogels
Advanced Materials · 2025-01 · 37 (3)
DOI: 10.1002/adma.202410720 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.11.2024. Verfasst von Arnaud Chaix und 12 weiteren Autor:innen. Beteiligte Einrichtung: Institut Européen des Membranes (IEM), Univ Montpellier, CNRS, ENSCM, Montpellier, 34090, France. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: CINES, TGCC, Institut Carnot Chimie Balard Cirimat.
Abstract (Originalsprache)
Per‐ and polyfluoroalkyl substances (PFAS) are now a paramount concern in water remediation. Nowadays, urgent action is required for the development of advanced technologies aimed at capturing PFAS and mitigating their impact. To offer a solution, a functional 3D printed hydrogel tailored is designed to trap a broad spectrum of PFAS contaminants. The hydrogel is made of a photo‐crosslinked dimethacrylate‐ureido‐trianglamine ( DMU‐Δ ) and Pluronic P123 dimethacrylate ( PDM ) fabricated by stereolithography (SLA). With the aid of 3D‐printing, porous and nonporous hydrogels ( 3D‐PSHΔ, 3D‐SHΔ ) as well as quaternized hydrogels ( 3D‐PSHΔQ + ) are prepared. These tailored hydrogels, show high uptake capacities and fast removal kinetics for PFAS from aqueous sources. The PFAS removal efficiency of these hydrogels are then compared to P123 hydrogels with no trianglamine ( 3D‐SH ). The 3D‐SH hydrogel shows no affinity to PFAS, proving that the sorption is due to the interaction between the trianglamine ( Δ) and PFAS. Metadynamic simulations also confirmed this interaction. The porous matrices showed the fastest and highest uptake capacity. 3D‐PSHΔ is able to capture ≈ 91% of PFAS within 5 h using initial concentrations of 5 and 0.5 ppm in both deionized and river water. The sorption of PFAS is further enhanced by introducing permanent positive charges to the structure of the porous hydrogels, resulting in even faster sorption kinetics for both long and short PFAS chains with diverse polar heads. Besides the remarkable efficiency in capturing PFAS, these designed hydrogels are non‐toxic and have outstanding chemical and thermal stability, making them a brilliant candidate for mass use in the combat against PFAS pollution.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institut Européen des Membranes (IEM), Univ Montpellier, CNRS, ENSCM, Montpellier, 34090, France.
- Institut Charles Gerhardt de Montpellier (ICGM), Univ Montpellier, CNRS, ENSCM, Montpellier, 34090, France.
- Laboratoire de Mécanique et Génie Civil (LMGC), Univ Montpellier, CNRS-UMR 5508, Montpellier, 34090, France.
- Institut des Biomolécules Max Mousseron (IBMM), Univ Montpellier, CNRS, ENSCM, Montpellier, 34090, France.
ORCID-Profile: Mona Semsarilar
Förderung
- CINES
- TGCC
- Institut Carnot Chimie Balard Cirimat
- Agence Nationale de la Recherche
Zitieren
APA
Chaix, A., Gomri, C., Benkhaled, B. T., Habib, M., Dupuis, R., Petit, E., Richard, J., Segala, A., Lichon, L., Nguyen, C., Gary-Bobo, M., Blanquer, S., & Semsarilar, M. (2025). Efficient PFAS Removal Using Reusable and Non‐Toxic 3D Printed Porous Trianglamine Hydrogels. Advanced Materials, 37(3). https://doi.org/10.1002/adma.202410720
Vancouver
Chaix A, Gomri C, Benkhaled BT, Habib M, Dupuis R, Petit E, et al. Efficient PFAS Removal Using Reusable and Non‐Toxic 3D Printed Porous Trianglamine Hydrogels. Advanced Materials. 2025;37(3). doi:10.1002/adma.202410720
BibTeX
@article{Chaix2025,
author = {Chaix, Arnaud and Gomri, Chaimaa and Benkhaled, Belkacem Tarek and Habib, Michel and Dupuis, Romain and Petit, Eddy and Richard, Jason and Segala, Antonin and Lichon, Laure and Nguyen, Christophe and Gary-Bobo, Magali and Blanquer, Sébastien and Semsarilar, Mona},
title = {Efficient PFAS Removal Using Reusable and Non‐Toxic 3D Printed Porous Trianglamine Hydrogels},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {3},
doi = {10.1002/adma.202410720}
}
EUVIMED