3D-Printed Metal Electrodes with Enhanced Bubble Removal for Efficient Water Electrolysis
Nano Letters · 18.06.2025 · 25 (24) · 9551-9559
DOI: 10.1021/acs.nanolett.5c00837 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nano Letters, online erschienen am 09.06.2025. Verfasst von Nan Liao und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Photoelectronic Thin Film Devices and Technology, State Key Laboratory of Photovoltaic Materials and Cells, Tianjin Key Laboratory of Ef…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Science Fund for Distinguished Young Scholars of Tianjin Municipality, National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Improving the water electrolysis efficiency at high current densities is constrained by the structure of available foam and mesh electrodes, which suffer from internal bubble entrapment. Herein, we used laser powder bed fusion-based 3D printing to fabricate Schwarz Diamond (SD) structure nickel electrodes for water electrolysis. After loading with NiMoFeOx as the oxygen evolution reaction catalyst and MoNi4-MoO2 as the hydrogen evolution reaction catalyst, the anion exchange membrane water electrolyzer utilizing SD nickel electrodes achieved a current density of 1 A cm-2 at 1.74 V, outperforming conventional nickel foam and mesh electrode-based electrolyzers in the same conditions and demonstrated durable operation for more than 1000 h. In-situ observations of bubble evolution in the electrolyzer and single-frequency impedance spectra reveal that the 3D-printed SD structure exhibits highly efficient bubble/liquid transport. The present study investigates the potential of 3D printing technology in the fabrication of metallic porous electrodes for efficient water electrolysis.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Photoelectronic Thin Film Devices and Technology, State Key Laboratory of Photovoltaic Materials and Cells, Tianjin Key Laboratory of Efficient Solar Energy Utilization, Ministry of Education Engineering Re…
- Frontiers Science Center for New Organic Matter, Nankai University, Tianjin 300071, China.
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin 300192, China.
ORCID-Profile: Jingshan Luo
Förderung
- Science Fund for Distinguished Young Scholars of Tianjin Municipality
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Liao, N., Zhao, J., & Luo, J. (2025). 3D-Printed Metal Electrodes with Enhanced Bubble Removal for Efficient Water Electrolysis. Nano Letters, 25(24), 9551-9559. https://doi.org/10.1021/acs.nanolett.5c00837
Vancouver
Liao N, Zhao J, Luo J. 3D-Printed Metal Electrodes with Enhanced Bubble Removal for Efficient Water Electrolysis. Nano Letters. 2025;25(24):9551-9559. doi:10.1021/acs.nanolett.5c00837
BibTeX
@article{Liao2025,
author = {Liao, Nan and Zhao, Jia and Luo, Jingshan},
title = {3D-Printed Metal Electrodes with Enhanced Bubble Removal for Efficient Water Electrolysis},
journal = {Nano Letters},
year = {2025},
volume = {25},
number = {24},
pages = {9551--9559},
doi = {10.1021/acs.nanolett.5c00837}
}
EUVIMED