EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Influence of Pine Cone and Pine Resin Addition on the Properties of Plaster Composites

Ayse Bicer, Celal Kistak iD, Ali Taskiran iD, Nevin Celik iD

Polymers · 16.06.2026 · 18 (12) · 1501

DOI: 10.3390/polym18121501 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.06.2026. Verfasst von Ayse Bicer und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bioengineering, Malatya Turgut Ozal University, Malatya 44210, Turkey. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fırat University, Firat University, Scientific Research Projects Supporting Unit.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The physical characteristics of gypsum plaster composites made from agricultural wastes of pine cones (PCs) and pine resin (PR), as sustainable substitutes for traditional natural fillers, are examined in this work. Particle sizes of 3–5 mm, 0–3 mm, and powder were used to classify the PCs after grinding. First, gypsum plaster was replaced with PC particles at 20%, 40%, 60%, and 80% by weight for each group to produce resin-free specimens. To create artificial porosity and improve the matrix’s binding strength, 1% PR by total weight was then added to duplicate mixes, yielding 24 different sample combinations. In resin-free samples, the addition of 3–5 mm, 0–3 mm, and powder PC (in ratios ranging from 20% to 80%) reduced the thermal conductivities by 35.16%, 33.84%, and 34.97%, respectively, and the compressive strength values by 82.00%, 77.18%, and 77.50%. Further decreases in thermal conductivity (29.36%, 32.05%, and 33.66%) and compressive strength (76.89%, 75.64%, and 75.48%) were observed in PR-modified samples. The results show that adding PCs and PR to gypsum plaster considerably improves the plaster’s thermal insulation while marginally reducing its compressive strength loss.

Schlagwörter

Stichwörter der Autor:innen

composite building materialsgypsum plasterpine conepine tree resinthermal-mechanical properties

Autor:innen und Institutionen

  • Department of Bioengineering, Malatya Turgut Ozal University, Malatya 44210, Turkey.
  • Department of Mechanical Engineering, Firat University, Elazig 23119, Turkey.
  • Department of Mechanical Engineering, Sirnak University, Sirnak 73000, Turkey.

ORCID-Profile: Celal Kistak, Ali Taskiran, Nevin Celik

Förderung

  • Fırat University
  • Firat University, Scientific Research Projects Supporting Unit

Zitieren

APA

Bicer, A., Kistak, C., Taskiran, A., & Celik, N. (2026). Investigation of the Influence of Pine Cone and Pine Resin Addition on the Properties of Plaster Composites. Polymers, 18(12), 1501. https://doi.org/10.3390/polym18121501

Vancouver

Bicer A, Kistak C, Taskiran A, Celik N. Investigation of the Influence of Pine Cone and Pine Resin Addition on the Properties of Plaster Composites. Polymers. 2026;18(12):1501. doi:10.3390/polym18121501

BibTeX
@article{Bicer2026,
  author = {Bicer, Ayse and Kistak, Celal and Taskiran, Ali and Celik, Nevin},
  title = {Investigation of the Influence of Pine Cone and Pine Resin Addition on the Properties of Plaster Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1501},
  doi = {10.3390/polym18121501}
}
Kostenlos starten →