Influence of Biochar and Bio-Oil Loading on the Properties of Epoxy Resin Composites
Polymers · 15.04.2023 · 15 (8) · 1895
DOI: 10.3390/polym15081895 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.04.2023. Verfasst von Pamela Hidalgo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Processes, Faculty of Engineering, Universidad Católica de Temuco, Rudecindo Ortega 02950, Temuco 4780000, Chile. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONICYT- FONDECYT Project.
Abstract (Originalsprache)
In this study, we evaluated the use of bio-oil and biochar on epoxy resin. Bio-oil and biochar were obtained from the pyrolysis of wheat straw and hazelnut hull biomass. A range of bio-oil and biochar proportions on the epoxy resin properties and the effect of their substitution were investigated. TGA curves showed improved thermal stability for degradation temperature at the 5% (T5%), 10% (T10%), and 50% (T50%) weight losses on bioepoxy blends with the incorporation of bio-oil and biochar with respect to neat resin. However, decreases in the maximum mass loss rate temperature (Tmax) and the onset of thermal degradation (Tonset) were obtained. Raman characterization showed that the degree of reticulation with the addition of bio-oil and biochar does not significantly affect chemical curing. The mechanical properties were improved when bio-oil and biochar were incorporated into the epoxy resin. All bio-based epoxy blends showed a large increase in Young’s modulus and tensile strength with respect to neat resin. Young’s modulus was approximately 1955.90 to 3982.05 MPa, and the tensile strength was between 8.73 and 13.58 MPa for bio-based blends of wheat straw. Instead, in bio-based blends of hazelnut hulls, Young´s modulus was 3060.02 to 3957.84 MPa, and tensile strength was 4.11 to 18.11 Mpa.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial Processes, Faculty of Engineering, Universidad Católica de Temuco, Rudecindo Ortega 02950, Temuco 4780000, Chile.
- Department of Mechanical Engineering, Universidad de La Frontera, Casilla 54-D, Temuco 4811230, Chile.
Förderung
- CONICYT- FONDECYT Project
Zitieren
APA
Hidalgo, P., Salgado, L., Ibacache, N., & Hunter, R. (2023). Influence of Biochar and Bio-Oil Loading on the Properties of Epoxy Resin Composites. Polymers, 15(8), 1895. https://doi.org/10.3390/polym15081895
Vancouver
Hidalgo P, Salgado L, Ibacache N, Hunter R. Influence of Biochar and Bio-Oil Loading on the Properties of Epoxy Resin Composites. Polymers. 2023;15(8):1895. doi:10.3390/polym15081895
BibTeX
@article{Hidalgo2023,
author = {Hidalgo, Pamela and Salgado, Luis and Ibacache, Nayadeth and Hunter, Renato},
title = {Influence of Biochar and Bio-Oil Loading on the Properties of Epoxy Resin Composites},
journal = {Polymers},
year = {2023},
volume = {15},
number = {8},
pages = {1895},
doi = {10.3390/polym15081895}
}
EUVIMED