Influence of Carbon Fibre Addition, Ultrasonication and Vacuum Processing on the Mechanical and Conductive Properties of Expanded Graphite Polyester Resin Composites
Polymers · 17.03.2026 · 18 (6) · 731
DOI: 10.3390/polym18060731 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.03.2026. Verfasst von Divan Coetzee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Material Engineering, Faculty of Textile Engineering, Technical University of Liberec, 46117 Liberec, Czech Republic. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Student Grant Scheme at the Technical University of Liberec.
Abstract (Originalsprache)
Polyester resin composites containing expanded graphite often exhibit reduced mechanical strength due to the porous structure of the filler. The aim of this study was to enhance mechanical performance without compromising electrical behaviour. Although carbon fibre and expanded graphite are chemically identical carbon allotropes, their distinct morphologies motivated the use of carbon fibre to reinforce expanded graphite-filled polyester composites. To examine the role of expanded graphite porosity, ultrasonicated EG was used to produce exfoliated, lower-porosity particles, while vacuum processing was applied to remove entrapped air prior to curing. Adding 0.5–5 wt% milled carbon fibre increased electrical conductivity by up to three orders of magnitude relative to neat polyester while maintaining 70–80% of the original specific strength at moderate fibre contents. Ultrasonicated EG reduced tensile strength by more than 50% at 5 wt% loading and decreased conductivity due to additional grain boundary formation. Vacuum-processed EG not only provided slight mechanical enhancements but also significantly improved electrical properties by lowering surface resistance by 6–10 orders of magnitude, reaching the tens-of-Ω range at 3–5 wt% EG. This performance is comparable to previously reported conductive EG/polymer systems, which exhibit surface resistances of 10–102 Ω at 5 wt% EG. This systematic comparison offers practical guidelines for balancing conductive percolation and mechanical reinforcement in expanded graphite polyester composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Material Engineering, Faculty of Textile Engineering, Technical University of Liberec, 46117 Liberec, Czech Republic.
- Institute of New Technologies and Applied Informatics, Faculty of Mechatronics, Informatics and Interdisciplinary Studies, 46117 Liberec, Czech Republic.
- Department of Machine Parts and Mechanism, Faculty of Mechanical Engineering, Technical University of Liberec, 46117 Liberec, Czech Republic.
ORCID-Profile: Divan Coetzee, Jakub Wiener
Förderung
- Student Grant Scheme at the Technical University of Liberec
Zitieren
APA
Coetzee, D., Perez Aguilera, J. P., Tegginamath, A., & Wiener, J. (2026). Influence of Carbon Fibre Addition, Ultrasonication and Vacuum Processing on the Mechanical and Conductive Properties of Expanded Graphite Polyester Resin Composites. Polymers, 18(6), 731. https://doi.org/10.3390/polym18060731
Vancouver
Coetzee D, Perez Aguilera JP, Tegginamath A, Wiener J. Influence of Carbon Fibre Addition, Ultrasonication and Vacuum Processing on the Mechanical and Conductive Properties of Expanded Graphite Polyester Resin Composites. Polymers. 2026;18(6):731. doi:10.3390/polym18060731
BibTeX
@article{Coetzee2026,
author = {Coetzee, Divan and Perez Aguilera, Juan Pablo and Tegginamath, Akshat and Wiener, Jakub},
title = {Influence of Carbon Fibre Addition, Ultrasonication and Vacuum Processing on the Mechanical and Conductive Properties of Expanded Graphite Polyester Resin Composites},
journal = {Polymers},
year = {2026},
volume = {18},
number = {6},
pages = {731},
doi = {10.3390/polym18060731}
}
EUVIMED