EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Matrix Resin Toughening on the Compressive Properties of Carbon Fiber Composites

Xinfeng Ouyang iD, Xiao Wang, Qiufei Chen, Guojie Ge, Dong Liu, Kang Lin, Yunpeng Liu iD, Yangyang Zong, Shuo Duan, Kangmin Niu

Polymers · 27.11.2024 · 16 (23) · 3328

DOI: 10.3390/polym16233328 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.11.2024. Verfasst von Xinfeng Ouyang und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study investigated the effects of a toughening agent and micron-sized toughening particles (TP) on the resin and carbon fiber-reinforced polymer (CFRP) composites, with a particular focus on compressive strength. The results showed that the addition of the toughening agent improved the overall mechanical properties of both the resin and CFRP but had a minor effect on the residual compressive strength (CAI) of CFRP after impact. Compared to the pure toughening agent, the addition of TP increased the CAI, GIC, and GIIC of CFRP by 74%, 35%, and 68%, respectively. The SEM, ultrasonic C-scan, and metallographic microscopy were used to analyze the failure morphology and TP distribution. Compared to pure toughening agent modification, the introduction of TP led to the formation of continuous toughening particle layers, which reduced the compression damage area by 61%, significantly balancing and absorbing the load. This modification also resulted in typical kink band damage. This study found that resin toughening significantly improved the compressive strength of CFRP, while micron-sized toughening particles, in the form of toughening layers, notably improved the CAI. These findings provide valuable insights for enhancing the compression and impact resistance of CFRP.

Schlagwörter

Stichwörter der Autor:innen

carbon fiber compositescompressive propertiesmatrix resinparticle toughening

Autor:innen und Institutionen

  • School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China.
  • Zhongfu Shenying Carbon Fiber Company Limited, Lianyungang 222069, China.

ORCID-Profile: Xinfeng Ouyang, Yunpeng Liu

Zitieren

APA

Ouyang, X., Wang, X., Chen, Q., Ge, G., Liu, D., Lin, K., Liu, Y., Zong, Y., Duan, S., & Niu, K. (2024). The Influence of Matrix Resin Toughening on the Compressive Properties of Carbon Fiber Composites. Polymers, 16(23), 3328. https://doi.org/10.3390/polym16233328

Vancouver

Ouyang X, Wang X, Chen Q, Ge G, Liu D, Lin K, et al. The Influence of Matrix Resin Toughening on the Compressive Properties of Carbon Fiber Composites. Polymers. 2024;16(23):3328. doi:10.3390/polym16233328

BibTeX
@article{Ouyang2024,
  author = {Ouyang, Xinfeng and Wang, Xiao and Chen, Qiufei and Ge, Guojie and Liu, Dong and Lin, Kang and Liu, Yunpeng and Zong, Yangyang and Duan, Shuo and Niu, Kangmin},
  title = {The Influence of Matrix Resin Toughening on the Compressive Properties of Carbon Fiber Composites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {23},
  pages = {3328},
  doi = {10.3390/polym16233328}
}
Kostenlos starten →