EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Preheating Conditions on the Mechanical Reliability of HDPE Extrusion-Welded Structures for Medical Devices

Chung-Woo Lee iD, Eunho Choe iD

Polymers · 11.06.2026 · 18 (12) · 1467

DOI: 10.3390/polym18121467 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.06.2026. Verfasst von Chung-Woo Lee und 1 weiteren Autor:innen. Beteiligte Einrichtung: EM Actuators Lab, Korea Institute of Medical Microrobotics, Gwangju 61011, Republic of Korea. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Health & Welfare, Republic of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymers are increasingly used as structural materials in medical devices due to their lightweight, chemical resistance, and electrical insulation properties. High-density polyethylene (HDPE) is widely applied; however, the fabrication of large or thick components often requires extrusion welding. Since joint performance directly affects structural reliability, controlling welding quality is essential. In this study, the effects of preheating conditions on the mechanical performance of HDPE extrusion-welded joints were systematically investigated. Preheating temperature and hot-air movement speed were selected as key variables, and their influence on tensile, flexural, and elongation properties was evaluated experimentally. The results provide insight into the role of preheating in weld quality and offer guidance for process optimization in medical device applications.

Schlagwörter

Stichwörter der Autor:innen

extrusion weldinghigh-density polyethylene (HDPE)mechanical propertiesmedical device manufacturingpreheating conditions

Autor:innen und Institutionen

  • EM Actuators Lab, Korea Institute of Medical Microrobotics, Gwangju 61011, Republic of Korea.

ORCID-Profile: Chung-Woo Lee, Eunho Choe

Förderung

  • Ministry of Health & Welfare, Republic of Korea

Zitieren

APA

Lee, C. W., & Choe, E. (2026). Effect of Preheating Conditions on the Mechanical Reliability of HDPE Extrusion-Welded Structures for Medical Devices. Polymers, 18(12), 1467. https://doi.org/10.3390/polym18121467

Vancouver

Lee CW, Choe E. Effect of Preheating Conditions on the Mechanical Reliability of HDPE Extrusion-Welded Structures for Medical Devices. Polymers. 2026;18(12):1467. doi:10.3390/polym18121467

BibTeX
@article{Lee2026,
  author = {Lee, Chung-Woo and Choe, Eunho},
  title = {Effect of Preheating Conditions on the Mechanical Reliability of HDPE Extrusion-Welded Structures for Medical Devices},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1467},
  doi = {10.3390/polym18121467}
}
Kostenlos starten →