EUVIMEDEUVIMED entdecken
Crossref

Mechanical Reliability Estimation for FCCSP Platform Devices

Alex Lampert, Yutaka Suzuki, Jaimal Williamson, Tom Kronenberg, Deepa Kote, Francis Oyebanjo, Madison Monzingo, Karthekeyan Sridhar, Sylvester Ankamah-Kusi, Blake Travis, Gregory Ostrowicki, Rajen Murugan und 1 weitere

IMAPSource Proceedings · 27.10.2026 · 2026 (Symposium)

DOI: 10.4071/001c.173309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.10.2026. Verfasst von Alex Lampert und 12 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

From a thermomechanical perspective, the polymeric composite make-up of a flip chip substrate plays a pivotal role in overall package stress for both first and second level interconnects. There exist inherent tradeoffs for designing a device with respect to BGA integrity and back end of line (BEOL) film strength. For example, as a substrate’s effective CTE increases the BGA integrity may increase as well, but this will have a negative effect on silicon integrity. This paper outlines the methodology surrounding reliability prediction based on substrate material property. Flip chip packaging technology has been rapidly adopted for high performance integrated circuits for both automotive and industrial applications. There is a myriad of challenges in maintaining the mechanical reliability of parts. Board level reliability (BLR) under temperature cycling conditions remains a challenge to predict through modeling simulation as empirical test results are paramount for correlation. Due to the unique stack up of FCCSP devices (i.e. dielectric layers, copper density, organic material set) there is often mismatch in CTE between die, substrate, and PCB. This can result in marginality of BLR test results due large mismatch of device composite CTE to customer PCB CTE. This study developed a method to utilize a combination of finite element analysis (FEA) based thermo-mechanical modeling and characterization approaches as predictive method to estimate the cycle to first failure for BGA cracking in FCCSP devices as well as total device lifetime. This is accomplished by evaluating FCCSP devices under AEC-Q100 temperature cycling conditions in FEA-based thermo-mechanical models. BGA damage is extracted in a value known as plastic work density increment (PWDI), the total energy absorbed by a BGA during plastic deformation described by the ANAND rate-dependent plastic model. Using a portfolio of FCCSP devices with the known temperature cycle count of the first BGA failure, this cycle to failure is correlated to its associated PWDI value. Using a regression analysis of PWDI to first BGA failure, a predictive model of BLR failure has been developed, utilizing the Coffin-Manson type equation. Utilizing this methodology can allow for qualification by modeling (QBM) for future FCCSP developments. This FEA is also enhanced through the extraction of effective substrate properties through the use of substrate homogenization models. These homogenized models compare favorably to actual data collected with DMA and TMA, confirming a high confidence in the homogenization method within an error of +/- 20%. DMA and TMA data collection methods have been refined to show hysteresis curves through temperature cycling, indicating optimal test setup conditions. The primary driving factor in BGA stress under temperature cycling conditions is the difference in material property between substrate and PCB. This is reinforced in this study through empirical test results, with improved BLR performance utilizing a substrate with a CTE that is similar to that of the PCB relative to an alternative substrate. By extracting effective substrate Young’s modulus and CTE, these can be directly input into mechanical models. Many devices are built with redundancy, where high stress BGAs lack any electrical function of the device. Leveraging this design feature and utilizing multi-stage modeling (MSM) technique, iterative models are conducted depopulating the expected redundant BGA failures with each successive failure. This approach facilitates development of a total device lifetime model. Outputs enable a predictive model of the first temperature cycle in which a functional BGA will fail.

Zitieren

APA

Lampert, A., Suzuki, Y., Williamson, J., Kronenberg, T., Kote, D., Oyebanjo, F., Monzingo, M., Sridhar, K., Ankamah-Kusi, S., Travis, B., Ostrowicki, G., Murugan, R., & Chaudhry, U. (2026). Mechanical Reliability Estimation for FCCSP Platform Devices. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173309

Vancouver

Lampert A, Suzuki Y, Williamson J, Kronenberg T, Kote D, Oyebanjo F, et al. Mechanical Reliability Estimation for FCCSP Platform Devices. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173309

BibTeX
@article{Lampert2026,
  author = {Lampert, Alex and Suzuki, Yutaka and Williamson, Jaimal and Kronenberg, Tom and Kote, Deepa and Oyebanjo, Francis and Monzingo, Madison and Sridhar, Karthekeyan and Ankamah-Kusi, Sylvester and Travis, Blake and Ostrowicki, Gregory and Murugan, Rajen and Chaudhry, Usman},
  title = {Mechanical Reliability Estimation for FCCSP Platform Devices},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2026},
  number = {Symposium},
  doi = {10.4071/001c.173309}
}
Kostenlos starten →