The Effect of Preheating on the Mechanical Properties of AISI 1037 and AISI 304 Welded Joints Using Shielded Metal Arc Welding
Materials · 25.11.2024 · 17 (23) · 5780
DOI: 10.3390/ma17235780 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.11.2024. Verfasst von Sudarsono und 5 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Halu Oleo University, Kendari 93232, Indonesia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study explores the effect of preheating on the toughness of dissimilar welded joints between AISI 1037 and AISI 304 steels, using Shielded Metal Arc Welding (SMAW) and E309-16 electrodes. The innovation of this approach lies in assessing how preheating temperatures influence the mechanical properties of such welds. Preheating temperatures ranged from 150 °C to 300 °C, with impact testing revealing a notable increase in toughness, from 6.01 Joules at 150 °C to 19.57 Joules at 300 °C. Hardness tests indicated a maximum hardness of 313 VHN in the fusion zone and a minimum of 185 VHN in the AISI 304 area. Compared to non-preheated joints, preheating significantly enhanced impact strength and altered the fracture mode from brittle to ductile. Macrostructural and microstructural analyses with optical microscopy and SEM showcased changes in fracture surfaces and microstructural evolution, highlighting the improvement in mechanical properties due to preheating. These findings demonstrate that preheating critically enhances the toughness and overall performance of dissimilar metal welds, making it a valuable technique in industrial applications where enhanced joint toughness is crucial.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, Halu Oleo University, Kendari 93232, Indonesia.
- Department of Mechanical Engineering, Sriwijaya University, Indralaya 30662, Indonesia.
- School of Engineering, University of Wollongong Malaysia, Glenmarie Campus, Sham Alam 40150, Malaysia.
ORCID-Profile: Sudarsono, Amir Arifin, Gunawan, La Ode Ahmad Barata, Mohd Ikram Ramli
Zitieren
APA
Sudarsono, Arifin, A., Gunawan, Wijaya, M. R. Y. Q. A., Barata, O. A., & Ramli, M. I. (2024). The Effect of Preheating on the Mechanical Properties of AISI 1037 and AISI 304 Welded Joints Using Shielded Metal Arc Welding. Materials, 17(23), 5780. https://doi.org/10.3390/ma17235780
Vancouver
Sudarsono, Arifin A, Gunawan, Wijaya MRYQA, Barata OA, Ramli MI. The Effect of Preheating on the Mechanical Properties of AISI 1037 and AISI 304 Welded Joints Using Shielded Metal Arc Welding. Materials. 2024;17(23):5780. doi:10.3390/ma17235780
BibTeX
@article{Sudarsono2024,
author = {Sudarsono and Arifin, Amir and Gunawan and Wijaya, Muhammad R Y Q A and Barata, La Ode Ahmad and Ramli, Mohd Ikram},
title = {The Effect of Preheating on the Mechanical Properties of AISI 1037 and AISI 304 Welded Joints Using Shielded Metal Arc Welding},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5780},
doi = {10.3390/ma17235780}
}
EUVIMED