EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Preheating Temperature on Microstructure and Mechanical Properties of TIG Welded Joints of Low-Activity Martensitic Steel

Yinglong Zhang, Shichen Yan, Hongpeng Zhang, Xiaoquan Yu, Chen Dong, Cunfeng Yao, Jiankang Huang

Metals · 08.11.2026 · 16 (11) · 1224

DOI: 10.3390/met16111224 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 08.11.2026. Verfasst von Yinglong Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of preheating temperature on the microstructural evolution and mechanical properties of low-activity martensitic steel welded joints were investigated, with emphasis on the relationship between preheating temperature, δ-ferrite content, and impact energy. Preheating temperature ranged from 150 °C to 300 °C. Optical microscopy and TEM were used for microstructural characterization, and tensile and impact tests were conducted to evaluate mechanical properties. The results showed that preheating temperature influenced the retained δ-ferrite content in the weld metal, whereas its effect on the heat-affected-zone microstructure was comparatively limited. The δ-ferrite fraction exhibited a non-monotonic dependence on preheating temperature, reaching a minimum of 2.76% in the filler weld pass at 250 °C. As the δ-ferrite fraction increased to approximately 13.27% at 150 °C, the average impact energy of the weld metal decreased from 47.37 J at 250 °C to 34.57 J at 150 °C. Impact fracture analysis revealed preferential crack propagation along δ ferrite/martensite interfaces and through δ-ferrite grains. An increase in the δ-ferrite fraction may promote the formation of interconnected ferrite networks, thereby facilitating crack propagation and reducing the impact toughness of the weld metal.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Y., Yan, S., Zhang, H., Yu, X., Dong, C., Yao, C., & Huang, J. (2026). Effect of Preheating Temperature on Microstructure and Mechanical Properties of TIG Welded Joints of Low-Activity Martensitic Steel. Metals, 16(11), 1224. https://doi.org/10.3390/met16111224

Vancouver

Zhang Y, Yan S, Zhang H, Yu X, Dong C, Yao C, et al. Effect of Preheating Temperature on Microstructure and Mechanical Properties of TIG Welded Joints of Low-Activity Martensitic Steel. Metals. 2026;16(11):1224. doi:10.3390/met16111224

BibTeX
@article{Zhang2026,
  author = {Zhang, Yinglong and Yan, Shichen and Zhang, Hongpeng and Yu, Xiaoquan and Dong, Chen and Yao, Cunfeng and Huang, Jiankang},
  title = {Effect of Preheating Temperature on Microstructure and Mechanical Properties of TIG Welded Joints of Low-Activity Martensitic Steel},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1224},
  doi = {10.3390/met16111224}
}
Kostenlos starten →