Color Stability of 3D-Printed Dental Resins Following Different Surface Treatments
Polymers · 08.04.2026 · 18 (8) · 901
DOI: 10.3390/polym18080901 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 08.04.2026. Verfasst von Agnieszka Nowakowska-Toporowska und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Wroclaw Medical University, Krakowska 26, 50-425 Wroclaw, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wroclaw Medical University.
Abstract (Originalsprache)
Introduction
Recent advancements in technologies, such as 3D printing, have been adopted in prosthodontics to streamline clinical procedures and provide high-quality prosthetic devices to patients within a reduced timeframe. Aim of the study: This study primarily aimed to determine the color change levels of 3D-printed dental resins for temporary and long-term intraoral applications. We also evaluated the effectiveness of post-processing procedures such as polishing or glazing on color stability. Materials and methods: Three types of dental resins were tested in distilled water, coffee, and wine environments for 2, 7, 30, and 60 days. A spectrophotometric analysis was conducted, and the Ciede2000 formula was used to determine the DE.
Results
The material type, conditioning method, and storage time significantly affected the color changes of the tested materials. The post-processing technique had the most remarkable impact on color stability over time.
Conclusions
Glazing of the 3D-printed material surface appears to be the most effective approach to prolong its clinical applicability by maintaining color stability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, Wroclaw Medical University, Krakowska 26, 50-425 Wroclaw, Poland.
- SpofaDental, Markova 238, 506-01 Jicin, Czech Republic.
- Diamante Dental Clinics, ul. Sportowa 48A/C, 59-300 Lubin, Poland.
- Department of Experimental Dentistry, Wroclaw Medical University, 50-425 Wroclaw, Poland.
- Department of Molecular and Cellular Biology, Faculty of Pharmacy, Wroclaw Medical University, Borowska 211A, 50-556 Wroclaw, Poland.
- Department of Immunology and Bioelectrochemistry, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania.
ORCID-Profile: Zbigniew Raszewski, Adam Nowicki, Julita Kulbacka
Förderung
- Wroclaw Medical University
Zitieren
APA
Nowakowska-Toporowska, A., Raszewski, Z., Nowicki, A., Weżgowiec, J., Kulbacka, J., & Kijak, E. (2026). Color Stability of 3D-Printed Dental Resins Following Different Surface Treatments. Polymers, 18(8), 901. https://doi.org/10.3390/polym18080901
Vancouver
Nowakowska-Toporowska A, Raszewski Z, Nowicki A, Weżgowiec J, Kulbacka J, Kijak E. Color Stability of 3D-Printed Dental Resins Following Different Surface Treatments. Polymers. 2026;18(8):901. doi:10.3390/polym18080901
BibTeX
@article{NowakowskaToporowska2026,
author = {Nowakowska-Toporowska, Agnieszka and Raszewski, Zbigniew and Nowicki, Adam and Weżgowiec, Joanna and Kulbacka, Julita and Kijak, Edward},
title = {Color Stability of 3D-Printed Dental Resins Following Different Surface Treatments},
journal = {Polymers},
year = {2026},
volume = {18},
number = {8},
pages = {901},
doi = {10.3390/polym18080901}
}
EUVIMED