EUVIMEDEUVIMED entdecken
Vergleichsstudie

Comparison of color stability and wear resistance of different 3D printed definitive restorative resins

Zülal Çoban Gündogan, Özgün Yusuf Özyilmaz, Özlem Kara

The Journal of Prosthetic Dentistry · 2026-08 · 136 (2) · e360-e365

DOI: 10.1016/j.prosdent.2026.04.014 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift The Journal of Prosthetic Dentistry, 2026-08. Verfasst von Zülal Çoban Gündogan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Attending, Department of Prosthetic Dentistry, Faculty of Dentistry, University of Bezmialem Vakıf, İstanbul, Turkey. Electronic address: zulal.coban…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Composite Resins, Dental Restoration Wear, Dental Materials. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: Bezmialem Vakif University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Subtractive manufacturing in computer-aided design and computer-aided manufacturing (CAD-CAM) systems has been extensively studied, but additive manufacturing materials, particularly those used for definitive restorations, are relatively new and data regarding their clinical performance remain limited. PURPOSE: This in vitro study aimed to evaluate the color stability of 3 different 3-dimensionally (3D) printed definitive restorative materials under 5 different Commission Internationale de l'Eclairage illuminants and to compare their metameric color differences. In addition, the mechanical wear resistance of these materials was evaluated independently. MATERIAL AND METHODS: A total of 135 specimens with thicknesses of 1.0, 1.5, and 2.0 mm were 3D printed according to the manufacturers' protocols. Color was evaluated before and after thermocycling under 5 illumination conditions (D65, D50, A, F11, F2). ΔE00 values were analyzed using mixed-design analysis of variance (α=.05). Wear was evaluated in 2.0-mm specimens using simulated mastication and volumetric analysis, and the wear data were analyzed using the Kruskal-Wallis test (α=.05) RESULTS: All specimens exposed to illuminant A exhibited clinically unacceptable color changes, regardless of material type or thickness. Under illuminants D50, F11, and F2, color changes were perceptible but remained within clinically acceptable limits. Thermal aging significantly reduced ΔE00 values (P=.001). Although wear was observed in all groups, no significant differences were found in volumetric loss (P=.139). CONCLUSIONS: Illuminants significantly influenced color stability across all resin types and thicknesses, whereas increased restoration thickness was associated with reduced color change perceptibility. In addition, no significant differences in wear volume were found among the tested 3D printed definitive restorative materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalComposite ResinsDental Restoration WearDental MaterialsDental Restoration, PermanentColorComputer-Aided DesignMaterials TestingHumansIn Vitro Techniques

Substanzen

Composite ResinsDental Materials

Autor:innen und Institutionen

  • Attending, Department of Prosthetic Dentistry, Faculty of Dentistry, University of Bezmialem Vakıf, İstanbul, Turkey. Electronic address: zulal.coban@hotmail.com.
  • Professor, Department of Prosthetic Dentistry, Faculty of Dentistry, University of İstanbul Galata, İstanbul, Turkey.
  • Professor, Department of Prosthetic Dentistry, Faculty of Dentistry, University of Biruni, İstanbul, Turkey.

Förderung

  • Bezmialem Vakif University

Zitieren

APA

Çoban Gündogan, Z., Özyilmaz, Ö. Y., & Kara, Ö. (2026). Comparison of color stability and wear resistance of different 3D printed definitive restorative resins. The Journal of Prosthetic Dentistry, 136(2), e360-e365. https://doi.org/10.1016/j.prosdent.2026.04.014

Vancouver

Çoban Gündogan Z, Özyilmaz ÖY, Kara Ö. Comparison of color stability and wear resistance of different 3D printed definitive restorative resins. The Journal of Prosthetic Dentistry. 2026;136(2):e360-e365. doi:10.1016/j.prosdent.2026.04.014

BibTeX
@article{obanGndogan2026,
  author = {Çoban Gündogan, Zülal and Özyilmaz, Özgün Yusuf and Kara, Özlem},
  title = {Comparison of color stability and wear resistance of different 3D printed definitive restorative resins},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2026},
  volume = {136},
  number = {2},
  pages = {e360--e365},
  doi = {10.1016/j.prosdent.2026.04.014}
}
Kostenlos starten →